HZTC-30Z 30kVA High Voltage Test Set Control Desk

HZTC-30Z is suitable for electric power branch, power department of factories, scientific research units, railway, chemical industry, power plants.

Working principle

Taking the microcomputer measurement and control unit as the core, the output voltage of the electric voltage regulator is controlled by automatic or manual working mode, and the high voltage is generated by the high voltage test transformer, and then the high voltage is applied to the tested product to generate the test current. In a continuous specified time, whether the test current exceeds the standard is checked to judge whether the tested product is qualified.

Tech Data

Power supply:  AV380V ± 10%, 50Hz

Power rating: 30KVA

Output Voltage: Customized

Output current: Customized

Voltage resolution: 0.1 kV

Current resolution: 0.1 mA

Measurement accuracy: 1%

Man-machine interface: large screen true color touch screen operation and display

Test method: automatic or manual test

Timing mode: according to the set time, automatic or manual timing

Timing range: 0 ~ 65535s

Power Master Switch: Used to switch on and off the input power supply of equipment, or automatically cut off the power supply when the equipment is over-current protected.

Emergency stop button: Used to cut off high voltage output in emergency (cut off after pressing, rotate to the right to recover).

Interlock input port: Used to connect the interlock switch, allowing high voltage output when the interlock switch is closed.

Port RS-232: Used to transfer test data.

Start-up indicator: light up after high-voltage start-up.

Touch screen: It is a man-machine interface, which is used for data display and personnel operation.

Boost indicator: Light up when boosting. Over-current indicator lamp: lights up when protection action occurs.

Step-down indicator: lights up when step-down is underway. Allow indicator light: lights up when the interlock switch is closed.

Automatic indicator light: lights up when it is in automatic mode. Grounding indicator lamp: illuminate when grounding is good.