HZG 5kVA 50kV Dry-Type Withstand Voltage Tester
Product Introduction
Dry testing transformer series is produced, it is completely changed by the backward state of old test transformer stupid, big and heavy, it can produce our matching mounted on a high-voltage silicon stack to provide DC high-voltage test power supply, with a control box ,automatic protection microammeters, gap and other ancillary equipment. Especially suitable for testing at field,so that heavy work becomes convenient, rapid, easy and flexible, efficiency is greatly improved. As a result, it is well received by power systems and large test workers at large factories and mines.
Major Technical Parameters
| Capacity | Input voltage | Output voltage | Output current | Output DC high voltage | Max. External dimension | Weight |
| (KVA) | (V) | (KV) | (mA) | (KV) | (mm) | (kg) |
| 5 | 200(400) | 50 | 120 | 70 | 300x310x680 | 46 |
Precautions
The insulating testing products of high voltage appliance should be safe and correct. In addition to know well the manual of this product, the operation must be implemented in accordance with relevant national standards and plans: GB/T16927-1996 High-Voltage Experimentation Technology and DL/T596-1996 Preventive Testing Regulations for Electrical Equipment.
Due to the design characteristics and structure limitation of this series products, continuous operation under rated output capacity should not exceed 2 hours. If the products need to be used again, the power can be connected until power off for 2 hours. Continuous operation can be done under two thirds of rated voltage and two thirds of rated current.
In normal insulation of high voltage appliance, this series products are not allowed to operate in case of exceeding rated output voltage.
When this series products consist of cascade high voltage test, users should pay special attention to check the correctness of conditions and wiring of Class 2 and 3 transformer's main body and insulating bracket, as well as the protective grounding of entire system and conditions of protective grounding.
Packing List
| No. | Item | Qty |
| 1 | Main engine | 1 |
| 2 | Control Box | 1 |
| 3 | Power line | 1 |
| 4 | Test line | 1 |
Huazheng Electric Manufacturing (Baoding) Co., Ltd
Contact: Julia
Department: Sales Manager
: sales09
Tel: +86-312-6775511
Fax: +86-312-6775656
Mob/Whatsapp:0086-
Skype:juliajin-huazheng
Address: Electeicity Valley Tech Centre, No.3088 Lekai Street, Hi-tech Zone, Baoding , Hebei , China.
Zip: 071000
















所有评论仅代表网友意见,与本站立场无关。