HZAQ-YGA High Voltage Operating Rods Tester and Insulating Sticks Test Machine

Product description
The test device is used for the overall power frequency withstａnd voltage test of insulation tools such as insulation rods and electroscopes of 1000 kV and below. The insulation rod pressure bracket adopts an insulated door structure, and a lifting trolley is installed in the middle of the door frame, and the insulation rod can be lifted for pressure test.
Features
● The effective height of the door frame is 5-10 meters, and the whole insulation rod test can be carried out.
● The gantry is supported by 2 sets of 4 post insulators, and the steel is used laterally.
The sheet metal fittings are connected to form a unitary body.
● There are insulated tracks in the middle of the pillar insulators on both sides, and the lifting trolley can slide on it.
● The top has a pressure equalizing cover to reduce partial discharge.
● The lifting car has a battery pack, and the wire sling is not connected to the lower part.
Remote control is used to ensure good insulation of high voltage.
● There are 12 stations on the lifting trolley, and 12 can be hung at a time.
Insulation rod, each station can measure high voltage leakage current, through
Infrared communication, the test data is transmitted to the test bench, and the test bench can
Display 12 leakage currents and battery power in real time.
● The lifting trolley moves to the lower side and the device can be charged automatically.

● The lower part of the insulating rod is made of special stainless steel test clip and connected to the ground.

Technical Parameters
Rated voltage 500-1200kV
Number of stations 12
Leakage current range 200mA
Leakage current measurement accuracy 1%
Effective height 5-10 meters