HZAQ-YG Remote Control Electric Insulation Rod Test Bracket

Product introduction
In order to meet the standard requirements and reduce labor intensity, the company developed a scaled remote electric insulated rod test stand. Insulated rod holder can be electrically adjusted electrode distance through a wireless remote control or button on the device, along with a scale ruler to quantify segment length. Electrode using a combination of conductive foam, can be surrounded by the insulation effect of the test subjects.

Features
● Insulation rod bracket for 10 ~ 500kV insulation rod overall test or segmented test.
● The stent is designed as 3 sets of electrodes with two sections of pressure-resistant structure, which can conduct two sections of insulation at a time Rod pressure test.
● The electrode adopts the combined groove type conductive foam, which can fully reach the contact effect. Self-locking
Opening and closing structure to facilitate loading and unloading of goods to improve work efficiency.
● The middle electrode connects the high voltage to the fixed main electrode, the auxiliary electrode is grounded on both sides, and the auxiliary electrode
Can be electrically driven to both sides expａnd or merge simultaneously.
● Double voltage mode The main and auxiliary electrodes connected to the reverse voltage can be doubled test voltage.
● Electric actuator adopts two ways of button control or wireless remote control, meanwhile it has micro control
System, easy to accurately adjust the distance.
● test scaffold scale scale, adjust the distance intuitive and accurate.

Technical Parameters
Test voltage Rated test voltage: 100kV 35kV insulated rod overall test, 110kV and below insulation rod segment test
Double voltage mode voltage: 200kV 63kV insulated rod overall test, 500kV and below insulation rod segment test