ASTM D1264 Water Washout Resistance Tester for Lubricating Grease

ASTM D1264 Water Washout Characteristics Lubricating Grease Tester is suitable to the standard of ASTM D1264. It is used to test water washout characteristics of lubricating greases.

Water spray resistance of lubricating grease: water spray resistance of lubricating grease is the ability of lubricating grease to resist water impact in running bearing, while water spray resistance of lubricating grease is the ability of lubricating grease to resist water spray impact on flat plate

The lubricating grease resistance to water spray performance tester is used to measure the resistance of lubricating grease to water spray in accordance with the standards of SH/T0109-92 and ASTMD1264 "Method for Measuring the Resistance of Lubricating Greases to Water Spray". It is a new product used to evaluate the resistance of lubricating grease to water flushing out of bearings under specified experimental conditions at 38 ℃ and 79 ℃.

Technical parameters

1. The water bath temperature is input to the thermostat through the PT100 sensor (resistance temperature measuring package) and processed by the internal arithmetic circuit of the thermostat to obtain a control signal, and this control signal is output, so as to complete the heating control.

2. The amount of water jet can be directly controlled by the circulating pump, large flow valve, nozzle, etc.

3. Electric heating rod heating method is adopted, and the heating speed is fast.

4. Purchase ball bearings according to the standard, and the timer can be accurate to 0.1S.

5. Sink capacity: ≥750ml.

6. Sink temperature control range: room temperature ~ 100 °C, continuously adjustable.

7. Bearing speed accuracy: 600±30r/min.

8. Water jet accuracy: 5±0.5ml/s (two-valve adjustment).

9. Thermometer 0~100 °C division value 1 °C

10. Sink temperature control accuracy: ±2 °C

11 Power: 600W

12 Bearing size: Type 204

13. Dimensions: 300×265×425mm

14. Instrument weight: 46kg