HZPM-1 Lubricating Oil High Temperature Foam Characteristics Tester
The high temperature foam tester is suitable for testing the foam characteristics of lubricating oil at 150ºC. The amount of static foam, the amount of moving foam, the amount of static foam at the specified time after the stop of ventilation, the time of foam disappearance and the percentage of total volume increase were measured. Executive standard Adaptation standard: ASTM D6082 SH/T0722
Configure
| NO | Name | Quantity |
| 1 | Lubricating oil high temperature foam characteristic tester | 1 |
| 2 | Thermometer 98℃～152℃ | 1 |
| 3 | Quartz glass graduated cylinder 1000ml | 4 |
| 4 | sealant stopper | 4 |
| 5 | Sealant plug (three holes) | 4 |
| 6 | Temperature Sensor | 4 |
| 7 | Measuring cylinder positioning sleeve | 4 |
| 8 | Air metal diffuser head (import) | 2 |
| 9 | Diffuser connecting rod | 2 |
| 10 | Silicone tube | 3m |
| 11 | air filter | 1 |
| 12 | air pump | 1 |
| 13 | Power cords and sockets | 1 |
| 14 | Manual, certificate | 1 for each |
Technical indicators
Input power: AC220V±10% 50Hz
Heating power: <2.5KW
Air bath temperature: 150±1.0℃
Oil sample temperature: 150±1.0℃
Air flow rate: 200±5ml/min
Number of test holes: 4 holes
Diffusion head permeability：3000~6000 ml/min
所有评论仅代表网友意见，与本站立场无关。