HZ-535-4 35 kV Portable High Voltage Pulse Generator Price

Tech Data

Intellectual voltage: 0 ～ 35kV (default 0 ～ 28kV)

High pressure division: level 1.5

Built -in capacitance: 4μF

Discharge power: 0 ～ 2550 J (default 0 ~ 1568 J)

Output voltage polarity: negative polarity

Intellectual: 400W

Overcurrent protection: 16A (more than 3 seconds)

Panel function description

1 Safe: The instrument shell floor, in order to prevent the instrument's shell from charging or personnel shock;

2 High -voltage output: dedicated DC high -voltage output terminal;

3 voltage table: high voltage output voltage indicator, used to display voltage values in real time;

4 Power socket: Instrument working power, AC 220V ± 10%/50Hz ± 1Hz;

5 Insurance pipe seat: AC 220V power supply system insurance tube installation office;

6 Power switch: "File I" means that the AC 220V power supply is powered by the system;"0 gear" means that the AC 220V power supply is turned off for the system;

7 Glip gap removal: click the button to observe the spacing of the two balls in the ball in the window, (preventing the schedule);

8 The gap between the ball is near: click the button to observe that the two goals in the goal gap in the window become smaller. (After the two goals are touched, it is forbidden to continue pressing this button to prevent the motor from overloading. , Prevent high -voltage output from directly connected to the ground to cause the internal high -voltage unit of the instrument to burn);

9 Start button/zero indicator light:When the zero indicator is on (yellow), it means that in the zero position, press the start button to start the high -voltage output;When the zero indicator is not bright, it means that it is not in the zero position. After the voltage adjustment knob is rotated against the time to zero, the zero indicator light is on, and then press the start button to start the high -voltage output.

10 Stop button/high -voltage indicator light: When the test is completed or abnormal, press this key to cut off the high -voltage output, and the high -voltage indicator light is on indicating that the high -voltage output has started;

11 Voltage regulating knob: Used to adjust the voltage; increase the high voltage of the output clockwise increase from small to large, and the high voltage of the output high voltage in counterclockwise decreases from large to small;

12 Overcurrent protection switch: Pressing the state indicates that the overcurrent protection function has begun; when it is bounced, it means that the instrument has triggered overcurrent protection.

13 current meter: indication of low -voltage side current.

14 Observation window: It is used to observe the internal gap between the internal balls and the nearby state, and observe the discharge state during impact.

15 Sample land: The pulse energy storage capacitor is negative, and there is a high voltage, which must be reliable. Samples are used when the waveform is sampled in the high -pressure flashing state of the cable fault tester. (Do not high -voltage flash sampling, still need reliability ground).

16 High -voltage land: also known as high -voltage tail, the internal device is grounded.

Huazheng Electric Manufacturing (Baoding) Co., Ltd

Contact: Julia

Department: Sales Manager

: sales09

Tel: +86-312-6775511

Fax: +86-312-6775656

Mob/Whatsapp：0086-

Skype：juliajin-huazheng

Address: Electeicity Valley Tech Centre, No.3088 Lekai Street, Hi-tech Zone, Baoding , Hebei , China.

Zip: 071000