High-altitude High Voltage Wiring Clamp

High-altitude high voltage wiring clamp are testing or maintenance of electrical equipment .Over the years, tranditional aerial can not be directly exposed to electrical equipment for testing or maintenance, the operator is required to climb wiring, which is unsafe and labor -intensity.

The advent of High-altitude high voltage wiring clamps are to transfer traditional aerial to the ground, whuch greatly improved. the working conditions of the site operation working conditions of the site operation as it is an fundamental solved the risk of climbing.

Features:

1. Simple operation, with special operating lever will take pliers jaws hanging on the card in the wiring required position, by sliding a dedicated operating lever to open and close the jaws freedom to complete wiring. Take pliers is opening large size (70mm), and a guide mechanism.

2. Clamp force, take pliers upper and lower jaw between the use of the principle of movable pulley effort , and thus can be obtained using a smaller rally greater clamping force .

3. Take pliers with internal locking and release device when special operating lever is pulled , elastic energy storage device within the clamp jaws can automatically lock as efforts required , if push proprietary operating lever , self-locking device will not turn on on their own.

4. Good contact ,it has overcome oxide film functions to ensure good contact with the jaw and wiring position .

5. Short-term electricity current, strong overload.

6. Practical, take pliers head angle can be changed by wiring different angles, different thickness, different diameters, 8 meters in height below ground wiring test or maintenance work .

7. Low weight , the use of light . Reasonable structure design, excellent texture , durable , clamp head weighs less than 700 grams.