HZRC030D Clamp DC Leakage Current Sensor
Product Description
HZRC030D Clamp DC Current Sensor use permalloy magnetic cores, with small size, high accuracy, good stability, strong anti-interference ability characteristics. It is applied with double shield technology, which insure strong anti-interference ability.
HZRC030D Clamp DC Current Sensor is widely applied in AC current leakage, current, power and energy measurement with high precision and small phase error of electricity, communications, meteorology, railway, oilfield, construction, measurement, scientific and research teaching unit, industrial and mining enterprises, which can be connected to a variety of high precision digital multi-meter and data recorder.
Parameters
Function | Measurement of DC current, DC leakage current |
Test mode | Clamp CT |
Power Supply | 9V DC±1VDC |
Rated Power | 20mA max |
Clamp Size | 25mm×30mm |
Range | 0-100mA DC |
Resolution | 0.1mA DC or 10mA DC optional |
Accuracy | ±3.0%FS(23℃±2℃, below 70%RH, keep the wire be in the center of clamp) |
Coils Turn | 1: 800 |
Signal Output | 2.5mV/1mA (0-1A/0-2.5V) |
Output Interface | Red wire: positive power input; Yellow wire: ground; White wire: positive signal output |
Output Wire Length | 2m |
Geomagnetic interference | About 3mA |
Measured Wire Position | Approximately in the geometric center of the clamp |
Line Voltage | Under 600V DC measurement |
Dimension | 115mm×70mm×33mm |
Weight | 180g |
Working Environment | -15℃-45℃; below 80%rh |
Storage Environment | -10℃-60℃; below 70%rh |
Insulation Strength | AC3700V/rms (between core and shell) |
Safety Rules | IEC1010-1, IEC1010-2-032, Pollution degree 2, CAT Ⅲ(600V) |
所有评论仅代表网友意见，与本站立场无关。