Portable 3 Phase Rotation Indicator Non-contact Phase Sequence Detection Meter-Huazheng Electric Manufacturing (Baoding) Co., Ltd

Portable 3 Phase Rotation Indicator Non-contact Phase Sequence Detection Meter

Portable 3 Phase Rotation Indicator Non-contact Phase Sequence Detection Meter Product Characteristics:

The latest patented technology, Non-contact phase sequence detection, Safe and fast, Phase detection (Normal, Reverse), Live wire examination, Simple power inspection, Phase deficiency judgment, Breakpoints finding and Line maintenance. Voltage Range: AC70~600V; Max cable Dimension to be clamped: ø1.6-ø16mm, LED Dynamic display, Clear power supply Three-phase Sequence.

Instrument base plate is provided with a magnet, the operation more convenient.

Portable 3 Phase Rotation Indicator Non-contact Phase Sequence Detection Meter Introduction

Safe and Time Saving	Traditional phase sequence measurement methods must poke the three-phase wire terminal, and connect the three bare alligator clips or test pins of phase sequence meters to the three bare firing lines, while HZCR1000C uses clamp non-contact measurement, without taking off the wire and no need to contact high-voltage bare fire-wire, the test can be made by directly clamping the three-phase insulating sheath by three super-sensitive high-insulated clamps. Conducting measurement on sheathed cable significantly improves the safety of field testing, effectively protect the operator's personal safety and increase productivity!
Convenient Operation	Instrument base plate is provided with magnet, instrument can adsorbed on the metal shell when testing, the operation more convenient.
Multi-Purpose	In addition to phase sequence detection, it also has the functions of live wire examination, simple power detection, fire-wire identification, phase deficiency determination, break location detection, DC line break and line maintenance, equivalent to 3 induction electric pens.
Dynamic Display	LED dynamic display, intuitive and clear
Sensitive and reliable	More sensitive HZCR1000C clamp, can even sense the AC voltage signal as low as a few Volts, with a wider range of live electricity.
Beautiful and scientific	The three clamps of HZCR1000C are in three colors, Red, Yellow and Green; It is more in line with the distinction of three-phase line, and more scientific and artistic overall appearance.
Ultra-low Power Consumption	HZCR1000C has a better power-saving performance with the maximum rated power of 100mVA.

Technical Specifications

Functions	Phase detection (normal phase, reverse phase and phase deficiency), Live wire examination, Simple Power detection, Breakpoint location and Line maintenance.
Power Supply	DC3V AA Mn batteries (R6P) ×2 PCS, Continuously working for 200 hours
AC Voltage Range(V)	AC0~600V, 40~70Hz (Sine Wave Continuous Input)
Clamp Wire Size	Diameter ø1.6-ø16mm
LED Display	[Positive Phase Sequence] The four phase-sequence lamps blink in order (clockwise). [Negative Phase Sequence] The four phase-sequence lamps blink in order (counterclockwise). [Line-voltage Indication]L1/L2/L3 lamp light up. [Default Phase]L1/L2/L3 lamp is off. [Open Circuit]L1/L2/L3 lamp is off.
Power On Indication	Power on indication light turns on
Auto Power off	After 3 minutes, the meter automatically cut off power supply.
Meter Dimension	Width, height, thickness 70mm75mm30mm
Clamp Lead Length	0.5m
Meter Weight	180g (with battery)
Working Temperature and Humidity	-10ºC~55ºC; below 80%rh
Storage Temperature and Humidity	-20ºC~60ºC; below 90%rh
Maximum Measured Voltage	AC600V
Dielectric Strength	5.4kVrms
Maximum rated Power	100mVA
Safety Provisions	EN61010-1: 2001, EN61010-031: 2002, Pollution level 2, CAT III(600V), Transient over-voltage 6000V
Accessories	Meter: 1 Piece; Carrying case; 1 Piece.