HZJB-I Secondary Current Injection Test Set Three Phase Relay Test Kit

High-Performance Industrial Control Computer

High performance Industrial control computer is adopted as the controlling computer, through which you can run the windows operating system directly. 6.4"TFT true color LCD display, tracking ball and optimized keyboard are allocated on the faceplate of this tester, which can be used without the external mouse and keyboard. USB interface, 10-100M net mouth and serial communication interface are located on the back plate of this tester, through which you can access data, communicate data and upgrade software conveniently.

The whole process and the result of the test will all be showed on the LCD. The English operational interface of the complete set is very friendly and convenient. The tracking ball and keyboard on the faceplate will implement the operation. The operation is simple and convenient, and is easy to be mastered. Operator only needs a little knowledge of computer.

Keyboard and mouse interface are also allocated on the faceplate. If you would like to use the external mouse and keyboard, through pluging them with corresponding interfaces, you can operate this tester just like operate a desk-top computer.

Instruction to Front panel

1 Voltage output terminal.

2 Current output terminal: the red signal lamp on the right of this terminal shows whether waveform distortion or load open circuit exists when the current is output

3 Digital input terminal: there are 10 input. Please connect the positive end of inpur to the common end of the tester when inputting potential

5 Power Supply Switch

6 USB communication port: it can be connected with PC outside to doing test

7 USB interface: it can be connected with external equipment like mouse, keyboard, flash disk, printer, etc

8 Ground socket

9 TFT LCD display, defaulted resolution: 800×600

10 Track ball mouseLeft and right key of Track ball mouse

11 Left and right key of Track ball mouse

12 Faceplate optimized keyboard