Manual test functions

Can arbitrarily set the AC amount of various voltages, current amplitude, phase, and set various fault types of parameters

Test the electrical performance of relays and protection with AC voltage (including phase voltage, line voltage, zero sequence voltage, positive sequence voltage, negative sequence voltage), AC current (including phase current, line current,) amplitude, phase, frequency, impedance and other variables.

The step size can be manually controlled, and the step size can be changed by any setting variable

Changes in output can be controlled

Monitor changes in the input volume

Action time can be tested

Multiple continuous state tests

Provides a variety of state sequence settings

Provide a variety of time control, input control, manual trigger for state switching

Can set various types of faults, including single grounding, two-grounding, interphase short circuit, three-phase short circuit. Fault type Instantaneous fault, permanent fault, transformational fault, and can control the fault transition time

Can provide constant current, constant impedance and other test methods

It can simulate the opening and closing time of the short-circuit device

Can provide a separate voltage output as zero sequence voltage or line extraction voltage

As zero sequence voltage can be set to ±3U0 or ±3√3U0; The amplitude and phase of the voltage can be set at will when the line extraction voltage is tested

Can check the opening, opening and logical relationship of the action behavior of relays, protection and safety automatic devices

The amplitude and phase of voltage and current can be set arbitrarily

Can set the status parameters of various faults

Can control each switching quantity separately

Dedicated test function

Low cycle load shedding

Concurrent test

Harmonic test

AC sampling test

Millisecond timing function

Remote test

Product Model

HZJB-1700

AC voltage output

4 channels：0-130V continuously adjustable６６V by default

Output precision

Accuracy：0~5V Accuracy error≤±２mV，5V～120V Accuracy error≤±0.1%±2mV；Resolution：1mV

Carrying capacity

≥30VA/phase

Response time

Voltage 5V~130：THD%≤0.5%，The voltage rise and fall time is less than 100µ s

Phase

0-360° continuously adjustable；Accuracy 0.2°；Resolution 0.1°

AC current output

3 channels：0-10A

Output precision

Accuracy：0.2~0.5A, Error≤2mA，0.5～10A Accuracy error≤0.1%±2mA；Resolution：1mA

Current output time

T330 current output time calculation formula is as follows:：

(Ia*Ia+Ib*Ib+Ic*Ic)*t = 600 seconds

Typical current setting output time is as follows:

Ia=1A, Ib =0A， Ic=0A output time is 600 seconds

Ia=1A，Ib =1A，Ic=1A output time is 200 seconds

Ia=5A，Ib=5A，Ic=5A output time is 90 seconds

Ia=10A, Ib=10A， Ic=10A output time is 6 seconds

Carrying capacity

≥20VA/phase

Response time

Current 0.5A~Imax：THD% ≤0.5%；The current rise and fall time is less than100µ s

Phase

0-360° Continuously adjustable；Accuracy 0.2°；Resolution 0.1°

Output frequency

0-650Hz，It can simulate 11 harmonics

Accuracy

Frequency range：10-65Hz Accuracy＜1mHz；65 Hz ~250Hz Accuracy＜10mHz

Opening & Closing volume

Opening volume：2 channels Isolation voltage is 500V， the null contact is compatible with 32V~250V potential, and the polarity is automatically recognized；

Closing volume：Type of 2 channels closing volume: optocoupler opening, time resolution is 0.1ms.

Adapter

DC 16.8V 5A

Built-in battery & Endurance

Built-in 20 amh lithium battery; Normal use of 8 hours

Instrument size & Weight

Less than 2.75kg（hand-held）size：255x210x78（mm）