SBW-30KVA 3 Phase Automatic Voltage Stabilizer
Technical Parameter
| Input | Voltage regulation range | 3φ4W+G 380V±20% Line voltage 178-263V |
| Frequency | 50Hz/60Hz | |
| Output | Rated Capacity | 30KVA |
| Rated current | 45A | |
| Rated voltage | 3φ4W+G 380V,1φ2W+G 220V | |
| Stabilization accuracy | ±1- 5%(Can be set) | |
| Response time | ≦1s | |
| Waveform distortion | No additional waveform distortion (static) | |
| Efficiency | ≥98% | |
| Sampling method | Isolated true effective value sampling | |
|
Control protection | Over-voltage | Output phase voltage exceeds 10% (245V), cut off the output |
| Under-voltage | Output phase voltage is lower than 10% (195V), cut off the output | |
| Lack of phase | Available (automatically cut off) | |
| Overload | Overload cuts off the output within 3 minutes | |
| Over-current | Circuit breaker protection | |
| Short circuit | Circuit breaker protection | |
| Bypass | Manual bypass | |
|
Index | Voltage | A, B, and C three phases have true effective value LCD liquid crystal display |
| Current | A, B, and C three phases have true effective value LCD liquid crystal display | |
| Working status | Voltage stabilization status/mains power status | |
| Abnormal | ||
| Way of working | It has two working modes: voltage stabilization and mains power | |
| Overload capacity | 5 times the rated current for 1 second | |
| Working pressure | No breakdown within 1 minute at 3000V | |
| Ambient temperature | -150C~450C | |
| Environment humidity | ≤95%, no condensation | |
| Insulation resistance | ≥5MΩ | |
| Cooling method | Self-cooling | |












所有评论仅代表网友意见,与本站立场无关。