HZ-503 Pin Point Detector Power Cable Fault Pinpointer

I.Cable Fault Pinpointer Instrument features

★ Display using a bright 4.3-inch OLED color LCD, making the display interface more clearly.

★ Function and parameter adjustment using a one-click programmable pulse encoding keyboard, making the operation panel more concise, while more convenient operation.

★ The instrument will be real-time acquisition of the audio part of the waveform and display it, you can observe the characteristics of the waveform and repeat the distance from the axis of the fault point to observe the distance, the operator observed waveform is not easy fatigue. At the same time in a single mode can be 15m within the audio waveform for detailed analysis to support the flip display.

★ In the sound and magnetic fixed-point mode has a single and continuous mode, if the discharge frequency is too fast, the gap time is too short, the user can choose a single mode on the discharge waveform and other related data slowly and carefully analyzed.

★ In the sound wave signal acquisition using four kinds of filtering frequency band, low frequency band, intermediate frequency band, high frequency bａnd and full band, the user according to the actual situation of the scene can be selected.

★ Step voltage part of the use of waveform display, the signal for continuous sampling refresh so that the user for the continuity of the signal analysis and sudden increase in the signal jump.

★ Step voltage part of a total of 20 stalls in the adjustment process automatically for large signal attenuation, to ensure that the maximum voltage range within the test input, the display signal is not limited.

★ Digital filtering part of the use of digital filtering technology, making the feature bａnd is more obvious, better filter performance.

★ The distance of the fault point shows that the distance of the fault point can be displayed within the range of 0--25m.

II. Cable Fault Pinpointer Precautions for use

1. Please read the instruction manual carefully before operating the instrument.

2. The use of the corresponding probe should be properly connected, the use of abnormal abnormalities should be promptly disabled.

3. In the course of use to ensure that the instrument and the probe part of the clean and dry.

4. When the instrument shows insufficient power, the instrument should be charged in time.

5. When the instrument is not used for a long time, every quarter or half of the instrument for a charge and discharge.