I.Instruction of Instrument Panel Structure
1. Frequency response test - signal output
2. Frequency response test - signal recovery
3. Frequency response test - response signal
4. Impedance test – Phase-A terminal
5. Impedance test – Phase-B terminal
6. Impedance test – Phase-C terminal
7. Fuse, 5A
8. Power supply terminal, AC 220
9. Grounding terminal
10. Built-in printer
11. USB communication interface
12. USB interface
13. LCD
Tech Data
Frequency response method
1. Sweep range:1KHZ ~ 10000KHZ (10MHZ)
2. Sweep resolution:0.1khz
3. The output signal amplitude：20Vp-p
4. Output frequency accuracy：0.01%
5. Frequency response range：-120 dB ~ +20 dB
6. Frequency response resolution：0.1 dB
7. Input impedance：1MΩ
8. Output impedance：50Ω
Impedance method
1. Three phase test method
2. Single machine maximum output：AC 100V / 5A
3. measurement accuracy：0.2%
Notes:
Please confirm whether the parameters are correct if the test result is abnormal.
Please check whether the fuse tube is blown if there is no voltage or current.
Please pull out and plug in communication cable and try again if there is no response in test.
Packing List
No. | Item | Qty |
1 | Impedance test line | 3 |
2 | Power line | 1 |
3 | USB communication line | 1 |
4 | Red and green test clamp | Each 1 |
5 | Ground lead | 3 |
6 | Coaxial line | 3 |
7 | Black Alligator Clip | 4 |
8 | U disk | 1 |
9 | Print paper | 2 |
10 | Fuse pipe(15A) | 3 |
所有评论仅代表网友意见，与本站立场无关。