HZ-1301 Automatic Petroleum Products Distillation Tester

I. Instructions for Use

HZ-1301 Automatic distillation tester is designed and manufactured according to GB / T 6536-2010 ASTM D86 ISO3045

HZ-1301 Automatic distillation tester adopts modular design, advanced sensor and high-precision AD conversion circuit are used in the detection part, and multiple industrial applications, high-reliability 24 - bit RISC structure and ultra-low power consumption microprocessor are used in the main control part. Good and reliable communication will form a unified and reliable measurement and control platform for each module.

The HZ-1301 Automatic distillation tester is driven by stepping motors in all the moving parts, and has the characteristics of high precision, low noise, reliable operation, small maintenance and long service time.

The operation program of DRT - 1108B Automatic distillation tester measuring instrument adopts high quality and simplest modular program design, and combines with hardware organically, so that all the work of heating and cooling, liquid level tracking, recording temperature, printing and so on in the boiling range measuring process can be automatically completed, and the operation mode of pressing out the result with one key can be achieved.

The HZ-1301 Automatic distillation tester automatically detects the atmospheric pressure of the environment and the working temperature in the tester, and automatically compensates the measurement results under the standard atmospheric pressure, thus increasing the comparability of the test results.

The HZ-1301 Automatic distillation tester preset 16 sets of measurement parameters for testing different samples, which is convenient for testing operation. At the same time, the preset parameters are modifiable to meet the requirements of measuring special samples.

II. Characteristics

Good man-machine interface and convenient operation

One key to complete boiling range determination and simplify operation

Sixteen sets of preset parameters are available for selection

The preset parameters can be modified to meet special requirements

Infrared liquid level detection is not interfered by indoor light and light

Liquid level tracking, flexible and free

All modular designs are stable and reliable

Automatically store 100 test results and view or print them at any time

The testing process complies with the standards and regulations, and the data are reliable

The detection method is reliable and has good repeatability

Can work continuously for a long time and has extremely low failure rate

III. Safety guidance

In order to ensure the safe operation of the HZ-1301 full automatic methanol boiling range tester, the following instructions must be observed:

1. Please read this instruction carefully before installation and use.

2. Please pay attention to the warning signs on the package.

3. For your safety, please pay attention to the need to use enough insulated tools when making electrical connections. In addition, you must comply with relevant safety knowledge about the construction and operation of electrical installations.

IV. Transport and storage

After opening the package, it is necessary to check whether the tester has been damaged during transportation and whether the accessories in the package are complete according to the packing list. Refer to the allowable environmental conditions in the technical parameters for storage and transportation.

V. The preparatory work before installation and testing

1. Installation position

The automatic boiling range analyzer is preferably installed in a laboratory with a good ventilation device or in a test bench or fume cupboard near the fume cupboard, so as to eliminate toxic gases in the detection process in time and ensure the safety and non-toxicity of operators.

2. Install the power supply

Plug the power cord with the instrument into the power socket at the back of the body and plug the other end into the 220 V AC power socket. Power on to work.

After the above adjustment, all the preparations before the instrument is used are completed. Can enter the official use.

VI. Technical parameters

Temperature range: room temperature ~ + 400 C accuracy 0.1 C ..

Temperature sensor: PT 100 glass probe imported from Germany with built-in temperature correction and reliable detection results.

Heating mode: electric heating unit, maximum heating power 1000 W, programmable control of heating rate.

Refrigeration mode: Germany imported compressor for refrigeration.

Liquid level detection: infrared photoelectric detection.

Display: Embedded 10 inch color touch screen.

Temperature correction: automatic correction, programmable correction.

Data storage: 100 test results.

Electric source: AC 220 V 50Hz.

Maximum power: 1500 W

Operating environment temperature: 10 ~ 30 ℃

Storage environment temperature: 0 ~ 50 ℃