时代HLN-11A里氏硬度计|HLN-11A 硬度测量仪
上海耀壮公司销售的时代HLN-11A里氏硬度计|HLN-11A 硬度测量仪是时代集团(TIME/TIMES)生产的一种新型的硬度测试仪器。时代HLN-11A里氏硬度计|HLN-11A 硬度测量仪它是根据新的里氏硬度测试原理(Dietmar Leeb)利用的微处理器技术设计而成。时代HLN-11A里氏硬度计|HLN-11A 硬度测量仪具有测试精度高、体积小、操作容易、携带方便，测量范围宽的特点。时代HLN-11A里氏硬度计|HLN-11A 硬度测量仪它可将测得的HL里氏硬度值自动转换成布氏硬度、洛氏硬度、维氏硬度、肖氏硬度等硬度值并打印记录，它还可配置适合于各种测试场合的配件。时代HLN-11A里氏硬度计|HLN-11A 硬度测量仪可以满足于各种测试环境和条件。
时代HLN-11A里氏硬度计|HLN-11A 硬度测量仪的标准配备冲击装置：
| 冲击装置名称 | 用途 |
| 冲击装置D | 用于大部分硬度测量 |
| 冲击装置DC | 用于非常局促地方(孔内、圆柱园内)的测量 |
| 冲击装置D十15 | 用于沟槽内或凹入的表面硬度测量 |
| 冲击装置E | 用于高硬度，碳化物含量高的工具钢的硬度测量 |
| 冲击装置C | 用于表面硬化了的部件，表面覆盖层，薄壁的硬度测量 |
| 冲击装置G | 仅用于布氏硬度650HB范围内的密实部件的硬度测量 |
| 冲击装置DL | 用于深槽槽底或型面（如齿面）等零件的测量 |
时代HLN-11A里氏硬度计|HLN-11A 硬度测量仪的主要技术参数：
| 示值误差 | 相对误差±0．8％(LD=800时) |
| 示值重复性．8％(LD=800时) | |
| 硬度被测材料 | 钢和铸钢、合金工具钢、灰铸铁、球墨铸铁、铸铝合金、铜锌合金(黄铜)、铜锡合金(青铜)、纯铜等 |
| 强度被测材料 | 碳钢、铬钢、铬钒钢、铬镍钢、铬钼钢、铬锰硅钢、强度钢、不锈钢 |
| 工作温度 | 0--40℃ |
| 工作电压 | 4.7V--6.0V |
| 测试方向 | 任意 |
| 整机重量 | 0．675Kg(标准配置：硬度计主机十打印装置十冲击装置D) |
| 外形尺寸 | 270×86×47（mm） |
| 一次充电工作时间 | 约24小时 |
时代HLN-11A里氏硬度计|HLN-11A 硬度测量仪的测试及换算范围：
| 冲击装置D、DC | |||||
| HRC | HRB | HB | HV | HSD | |
| STEEL钢和铸钢 | 17.9-68.5 | 59.6-99.5 | 93-651 | 83-976 | 32.2-99.5 |
| SWT.ST合金工具钢 | 20.4-67.1 | / | / | 80-898 | / |
| GC.IRON灰铸铁 | / | / | 93-334 | 80-898 | / |
| NC.IRON球墨铸铁 | / | / | 131-387 | / | / |
| C.ALUM铸铝合金 | / | / | 30-159 | / | / |
| BRASS(黄铜)铜锌合金 | / | 13.5-95.3 | 40-173 | / | / |
| BRONZE(青铜)铜锡合金 | / | / | 60-290 | / | / |
| COPPER纯铜 | / | / | 45-315 | / | / |
时代HLN-11A里氏硬度计|HLN-11A 硬度测量仪的英文介绍：
Metal Hardness Tester Model HLN-11A
Features of HLN-11A
D probe is for standard use.
DC probe is short and is convenient in small space.
DL type is used in confined surfaces such as gear wheels.
D+15 type is for measuring in grooves or recessed surfaces.
C type is used on surface-hardened, coated, thin-walled or impact sensitive components.
G type is used on heavy and rough cast and forged work pieces.
Specifications of HLN-11A (with impact device D)
| Measuring accuracy | ±0.8% of reading at LD=800 |
| Repeatability | 0.8% of reading at LD=800 |
| Minimum sample weight | 4.4 lb (2 kg) |
| (if coupled) | 0.22 lb (100g) |
| Minimum sample thickness | 0.2 in(5mm) |
| (if coupled) | 0.1 in(3mm) |
| Minimum radius of curved surface | 1.2 in (30mm) |
| (with support rings) | 0.4 in (11mm) |
| Min. thickness of hardened surface | 0.8mm |
| Maximum sample hardness | 900HLD(68HRC) |
| Hardness measurement value | HLD, HRC, HRB, HB, HV and HSD |
| Automatic calculation | Average test value |
| conversion of hardness value to strength value (s) | |
| Onboard memory | 9 data |
| Standard impact device | Model D |
| Optional impact device | DC, DL, D+15, C, G |
| Automatic identification of impact device | |
| Impact direction | 0°, ±45°, ±90° |
| Tungsten carbide test tip | |
| Operating voltage | 5.0V NiMH rechargeable batteries |
| Operating temperature | Processor 4.7°F to 104°F Probe -4°F to 248°F |
| Weight | approximate 1.4 lb |
| Dimentions | 10.6 x 3.4 х 1.8 in (270 х 86 х 47mm) |
| Compact carrying case | |
| removable micro printer | |
所有评论仅代表网友意见，与本站立场无关。