1.DEUTROPULS磁粉探伤仪在探伤过程中不会灼伤工件,重量轻，价格低。

2.电源简单，不需要使用变压器，可以直接使用42V电源。

3.可以根据工件的形状，使用不同的磁，特别是遇到倾斜工件表面时，可以灵活转动磁，保证小的磁能损失。

上海耀壮检测仪器设备有限公司经销商，为客户提供的服务。

●高磁化电源

●高负载率

●磁场分配

●便于操作的形状

●42V电源

●可移动的磁

●可用于荧光磁粉探伤

德国karldeutsch公司DEUTROPULS磁粉探伤仪（42V）手轭的技术参数：

磁间距 内侧 带有活动磁	135mm 45 - 225mm
能耗：吸附工件/离开工件	300/950VA±10%
电源：磁+5m电缆	42V50/60Hz 初始电压：220V 二次电压：220V
负载率	50%
磁化场强 空载 负载	12.8A/m(163 Oe) 4.1A/m(53 Oe)
漏电保护级别	I
漏电保护类型	防液体飞溅外壳
磁场强度	大12.6kA/m
尺寸(长/宽/高)	240/47/145
重量(包括电缆)	3.6kg

The DEUTROPULS Hａnd Yoke is a mobile yoke for magnetic particle inspection with extra magnetization performance, easy handling and for miscellaneous applications. The robust design allows reliable magnetic particle crack detection also under harsh conditions. The mechanical design takes the highest safety demands into account. The instrument is fully sealed with high-quality casting resin against humidity. The optimal positioning onto the different workpieces is possible with the help of interchangeable extended, angled or flexible attachment poles respectively.

The 230 V AC version can be connected to the power supply system either directly or via an isolating transformer (230 V promary / 230 V secondary) for alvanic isolation. The 42 V AC version (low supply voltage is fed by an isolating transformer (order no. 3850.242) which is connected primary to 230 V and provides a secondary voltage of 42 V or 35 V respectively.

Weight optimized design with high magnetization performance

User-friendly shape with short travel switch

Resistant to high voltages and high dielectric strength

High-quality resin casted housing

Easily exchangeable cable

Replaceable switch, sealed according to IP65, very high switching stability

High duty cycle

Characteristics in compliance with DIN EN ISO 9934-3:2002, ASTM E1444-05

Every DEUTROPULS Hａnd Yoke is subjected to an earth conductor test and is high-voltage resistant. Die 230 V version is protected against overheating by an integrated temperature sensor.

The new attachment poles ensure reliable magnetic particle testing through hot-dip galvanizings and thus permits testing in compliance with the DASt directive 022.

With the newly developed, geometrically optimized attachment poles of the hａnd yoke a field strength of more than 4 kA/m (40 A/cm) is achieved permitting magnetic particle testing of weld seams through the galvanizations. The magnetizing time and the post-magnetizing time is 6 seconds each. If required, available DEUTROPULS Hａnd Yokes can be retrofitted with these special attachment poles.

DEUTROPULS Hａnd Yoke 230 V

without attachment poles, 5 m cable

3446.230

DEUTROPULS Hａnd Yoke 42 V

without attachment poles, 5 m cable

3446.042

Attachment poles 10 mm (2 ea)

3852.102

Attachment poles 45° (2 ea)

3852.302

Attachment poles 60 mm (2 ea)

3852.402

Attachment poles 100 mm flexible (2 ea)

3852.202

Two-windings transformer

primary 230 V, secondary 230 V

3850.322

Two-windings transformer

primary 230 V / 110 V, secondary 35 V / 42 V

3850.242

Extension cable for hａnd yoke, 20 m

3839.200

Carrying case for hａnd yoke

3850.502

FLUXA testing agent for high contrast indications

refer to leaflet P90E