Features and Benefits
| Precise Results The METTLER TOLEDO HRT （HiRes Technology） includes two built-in weights. Together with FACT （Fully Automatic Calibration Technology）, this allows the balance to automatically perform adjustment and linearization. | |
| Efficient Handling Reduce the number of movements needed for every weighing. Open the draft shield ErgoDoor with one hａnd and simultaneously place the weighing sample with your other hand. | |
| Space Saving Save working space thanks to split draft shield doors that do not project beyond the balance, and sideways mounted connectors at the back of the balance. | |
| Easy Cleaning Cleaning has never been this easy: dismantle the QuickLock draft shield in a few short steps, then wash all glass panels and the drip tray in the dishwasher. |
| Standard Features | All models offer | |||||||||||||||||||
|
|
规格 - MS205DU 半微量天平
| Limit values | |
| Maximum capacity | 220 g |
| Maximum capacity, fine range | 82 g |
| Readability | 0.1 mg |
| Readability, fine range | 0.01 mg |
| Repeatability （at nominal load） 1） | 0.08 mg （200 g） |
| Repeatability （at low load） 1） | |
| Linearity deviation | 0.2 mg |
| Sensitivity offset 2） | 0.8 mg （200 g） |
| Typical values | |
| Repeatability （at nominal load） 1） | 0.07 mg （200 g） |
| Repeatability （at low load） 1） | 0.015 mg （20g） |
| Minimum weight （according to USP） | 45 mg |
| Minimum weight （@U=1%, 2 sd） | 3 mg |
| Settling time | 4s / 8s |
| Sensitivity offset 2） | 0.6 mg （200g） |
| Dimensions | |
| Weighing pan dimensions （mm） | ø 80 |
| Balance dimensions LxH （mm） | 358x247x331 |
1） Standard deviation （sd）
2） Stability of sensitivity with FACT self-adjustment switched on
所有评论仅代表网友意见，与本站立场无关。