日本ACE-GIKEN技研点胶阀SB-110ⅢL南京温诺供应
厂家:エース技研株式会社ACE-GIKEN
型号:SB-110、SB-110ⅢL
供应商:南京温诺仪器设备有限
日本ACE-GIKEN技研全系列销售,!
:陈经理
电话:
手机:
客服QQ:
邮箱:
产品介绍
スクリューバルブディスペンサー
スクリュー型の大容量モデル。
Screw valve that can dispense a large-capacity.
当社SB-110ⅢSと比較して約10倍の吐出が可能。
About ten times amounts can be dispensed compared with SB-110ⅢS.
スクリュー軸の回転制御での吐出が可能です。
Thanks to the rotation control of the screw shaft, you can get a high precision dispensing.
接液部と駆動部の接続は袋ナット方式を採用。メンテナンスも容易です。
This model has adopted cap-nut method, so you can maintain easy.
専用の交換式スクリューライナーを設け、吐出バラツキの改善、耐久性と消耗部品の低コスト化を高次元で両立させました。
Because the screw liner of the exchange type was adopted, the improvement of the stability, the improvement of durability, and lowering the cost in wear-out parts were able to be done.
適使用液
Suitable liquid material適応粘度Applicable viscosities液加圧方式Fluid pressurizing method材料圧送圧Material feed pressure駆動方式Dispensing screw driving methodモーター回転数Motor rotation speedモーター電源Motor powerモーター分解能Motor resolution外形寸法Externals dimensions重量Weight吐出量Dispensing volume用途Use備考Remarks
シリコン(Silicone)、グリス(Grease)他 |
30,000~100,000mPa・s(条件付で500,000mPa・s) |
同期加圧(Synchronous) or 常時加圧(Always) |
MAX0.5MPa |
ステッピングモーター(サーボ制御)(Stepping motor Servo control) |
6~1,000rpm |
AC100~115V |
0.72°/PULSE(500P/R) |
別紙外寸図参照 |
約3,170g |
0.05ml~0.5ml/sec程度 |
自動車部品にFIPG塗布、グリス塗布。電気部品にエポキシ樹脂塗布など |
ノズルは、別売と成ります。 |
高粘度液剤をに、高速塗布できるディスペンサーです。
SB-110ⅢL
スクリュー軸の回転制御で吐出が可能。 大容量モデル。
SB-110ⅢS
スクリュー軸の回転制御で吐出が可能。 高粘度液剤を効率よく高速に吐出します。
SB-110
スクリュー軸の回転制御で吐出が可能。 微細塗布向けコンパクトモデル。
SB-110
SB-110ⅢL
SB-110ⅢS
BP-100-01R
BP-10001R-SUS
P-100-01RPPS
BP-100-02R
BP-100-02R-SUS
BP-100-02RPPS
BP-100-03
BP-100-03-SUS
BP-100-03PPS
BP-100-05
BP-100-05-SUS
BP-100-05PPS
BP-100-08
BP-100-08-SUS
BP-100-08HⅡ
所有评论仅代表网友意见,与本站立场无关。