Z6540C为垂直分型冷热两用自动射芯机。该机通过射砂机构将砂子吹入模具后,再由吹气机构吹入三乙胺气体,将砂芯固化。
该机配有可升降的砂芯输送机,砂芯固化后,定模板自动翻转90°将砂芯顶出到输送机上,送至机器外部,不需人工伸手进入设备内部取芯,安全性更高。
配有光电料位计,准确控制砂筒内部砂量,可避免砂子外溢导致射砂时漏气而产生废品的现象。
该机有快换式射砂板、安全光幕、围屏等选配装置,提高工作效率和操作安全性,客户可根据需要进行选择。
Z6540C is a verticalpartingtype hot and cold automatic core shooting machine. After the machine blows the sand into the mold through the sand shooting mechanism, the triethylamine gas is blown by the air blowing mechanism to solidify the sand core.
The machine is equipped with a sand core conveyor that can be lifted and lowered. After the sand core is solidified, the fixed template automatically flips 90° to push the sand core out onto the conveyor and send it to the outside of the machine. It does not need to manually reach into the inside of the machine to take the core, which is more secure. high.
It is equipped with a photoelectric level gauge to accurately control the amount of sand inside the sand cylinder, which can avoid the phenomenon that the sand overflows and causes air leakage during sand shooting.
The machine has optional devices such as quick-change sandblasting board, safety light curtain and perimeter screen to improve work efficiency and operation safety. Customers can choose according to their needs.
项 目 | 参 数 |
模板尺寸size of mold board | 650mm×400mm |
有效射砂面积Max area of shooting sand | 590mm×230mm |
射砂量Max weight of shooting sand | 25Kg |
合模行程locking stroke | 650mm |
模板间距Max distance of mold board | 835mm |
下抽芯行程cyclinderstroke of at the bottom of the mold | 200mm |
取芯顶出行程Core out stoke | 50mm |
允许液压压力Max hydraulic pressure | 7Mpa |
三乙胺发生器功率Triethylaminegenerator power | 4kw |
液压泵功率Hydraulic pump power | 7.5kw |
输送机功率conveyor power | 0.37kw |
主机外形尺寸out size of the machine | 3800mm×1300mm×3400mm |
所有评论仅代表网友意见,与本站立场无关。