Vacuum dehydration oil purification system owns strong demulsification ability and uses physical methods to remove the water, impurities and gas(acetylene, hydrogen, methane, etc), it will not change the oil components and performance.
Applicable scope:
It is widely suitable for online processing of steam turbine, the gas turbine, the hydraulic turbine's oil in electric power,chemical industry, papermaking, metallurgy and so on to guarantee the unit adjusting and the normal work of the lubrication system.It used physical method remove the water, impurities and gas(acetylene, hydrogen, methane, etc), it will not change the oil components and performance.
Specifications:
Parameter:Item | Unit | ZJC-10 | ZJC-20 | ZJC-30 | ZJC-50 | ZJC-75 | ZJC-100 | ZJC-150 | ZJC-200 |
Flow rate | L/H | 600 | 1200 | 1800 | 3000 | 4500 | 6000 | 9000 | 12000 |
Vacuum degree | Mpa | -0.06 ~ -0.096 | |||||||
Working pressure | Mpa | ≤0.3 | |||||||
Fault free | H | ≥4000 | |||||||
Continuous working time | H | ≥150 | |||||||
Working temperature | ℃ | 40 ~ 70 | |||||||
Heating power | kW | 15 | 18 | 30 | 45 | 60 | 72 | 72 | 84 |
Total Power | kW | 17 | 20 | 33 | 49 | 66 | 79 | 81 | 97 |
Diameter of inlet &outlet | DN | 25 | 25 | 25 | 32 | 42 | 42 | 50 | 50 |
weight | Kg | 500 | 530 | 570 | 780 | 800 | 960 | 1050 | 1550 |
Dimension (mm) | L | 1300 | 1350 | 1450 | 1500 | 1500 | 1800 | 1800 | 1800 |
W | 1000 | 1000 | 1100 | 1150 | 1000 | 1500 | 1650 | 1500 | |
H | 1450 | 1450 | 1500 | 1650 | 1750 | 1800 | 1900 | 2000 | |
Oil index after treatment | |||||||||
Water content | 80ppm | ||||||||
Gas content | ≤0.1% | ||||||||
cleanness | ≤5µm(or as per requirement) | ||||||||
Demulsification Value | ≤10 min |
The machine contain following main parts:
◆Vacuum Dehydration (Degas) System
1 The vacuum dehydration oil purification system vacuum vessel can increase evaporation area efficiently. The heater, being placed on the vacuum vessel, becomes an evaporator. Thus the evaporation area of vacuum vessel is three times more than that of the general vacuum vessel.
◆Electrical Apparatus Controlling System
1 The main components of the electrical apparatus made by Schneider or Siemens
2 Having several protection systems which will avoid oil ejection, overload and over voltage etc.
◆Filter Elements(particulate matter removal)
1, Stainless steel filters can remove 99.5% particles.The sizes of the filter elements and aperture dwindle gradually in the different filtering stages. The impurities with different particulate sizes are filtered step by step. The capability of removing particulate matters and impurities is improved greatly by this method.
◆Electric heater
Oil Heater System assures less than 1.0w/cm2. the temperature rang is 40C to 80C. The heater is controlled automatically. The heater will stop automatically when the oil temperature reaches 80 degree, and it will begin to heat when the temperature is lower than 40degree. Being installed with safety protection devices, the heating system is secure and reliable. The heater will stop operation automatically when the oil volume of inlet is too low to avoid the damages of the heater.
◆Infrared Oil-level Controlling System
The oil-level floating ball or infrared liquid level automatic controller system are installed in the vacuum vessel to control the oil level so as to avoid the oil being suctioned into vacuum pump in the operation.
◆Vacuum Pump
Rotary Vane Vacuum Pumps, is a basic equipment used for pumping air from sealed vessels to attain vacuum condition.
Package
所有评论仅代表网友意见,与本站立场无关。