Description of oil filtration plant
ZJK oil filtration plant is used to filter and separate water,impurities and gas,especially remove big quantity impurities,such as fine powders,metal powders,coal powder etc. Suspended impurities,floccule,fibers(paper and cotton wool) from hydraulic oil, gear oil,injection molding machine oil, vacuum pump oil, or the oil from paper industry,smelting and mining industry.
This machine also can work together with decolorization system,which can adsorb and regenerate the oil, reduce the acid value and change color.
Technical parameter
Product Specifications | |
Item | Unit |
Capacity | 10-600 Liters /minute |
Working pressure | ≤0.3Mpa |
Work Noise | ≤60dB(A) |
Motor Power | 0.75Kw |
Power Consumption | 380Volt/3ph/60Hz |
In the production, the vast majority of machinery and equipment will use oil, such as metal stamping industry, heat treatment industry, injection molding industry, etc., and a large number of petroleum products such as cutting oil, hydraulic oil, quenching oil, drawing oil, lubricating oil, etc. In the production process, the oil is easily split into several carbon particles in a heated and pressurized environment. These smaller carbon particles than the oil molecules will accelerate the aging and splitting of the oil. After a period of use, the viscosity of the oil decreases, and under the influence of external impurities, the machine equipment is worn at all times, reducing the accuracy of the machine and shortening the service life.
Why we choose ZJK oil filtration plant?
A. reconfigure additives
After the oil is used for a period of time, if the oil is mixed with metal impurities or water and not treated in time, the additive will deteriorate, the re-formulation is troublesome, and the cost is high, and it is not recommended.
B. remove metal impurities
Use ZJK oil filtration plant to remove impurities from the oil at any time.Four-stages filtration system, which can effectively filter out suspended particles and fine powdery impurities from the oil.
C. remove water
The water can be moved by our ZJK oil filtration plant or our other vacuum oil purifiers, too.
1) Three-dimensional complex type flash evaporation and aggregation separation,which can remove water and gas rapidly and thoroughly.
2) Strong wind condensing system: can quickly condense water vapor into water, increase the dehydration rate and reduce the vacuum pump load.
Oil index after treatment | |
Demulsification Value | ≤8min |
Moisture | ≤100PPm |
Kinematic viscosity | GB443-89(m㎡ /s) |
Mechanical impurities | 0.05~0.005GB/T511 |
Cleanliness | NAS 6 |
所有评论仅代表网友意见，与本站立场无关。