Suitable oil types:
Used hydraulic oil filtration system has a very wide range of applications and is suitable for the purification and regeneration of various lubrications in petroleum, chemical, mining, metallurgy, electric power, transportation, machinery manufacturing, railway and other industries, and has significant economic benefits.
Advantages
1. The ability to filter impurities is strong, and the large-area and deep-level precision filter material can remove fine particles in the oil.
2. Automatic backwash function: automatically clean the filter to trap a large amount of impurities.
3. Advanced medium endothermic condensation system.
4. The used hydraulic oil filtration system is equipped with pressure protection, automatic temperature control heating, automatic separation of condensate water device, and drainage during line operation. The operation is simple, safe and reliable.
5. High-quality filter material is used, which has large dirt holding capacity, corrosion resistance, high temperature resistance, high mechanical strength, high impurity removal accuracy and long service life.
6. Unique degassing and dehydration system: It adopts three-dimensional evaporation technology and multi-level oil-water separation technology to quickly separate water, gas and impurities in oil.
Working site
Technical Parameter
| Index name | Unit | ZJD -10 | ZJD -20 | ZJD -30 | ZJD -50 | ZJD -75 | ZJD -100 | ZJD -150 |
| Flow rate | Litres / hour | 600 | 1200 | 1800 | 3000 | 4500 | 6000 | 9000 |
| Vacuum degree | Mpa | -0.06 - -0.095 | ||||||
| Working pressure | Mpa | ≤0.4 | ||||||
| Temperature range | C | 0 - 100 | ||||||
| Water content | PPm | ≤80 | ||||||
| Cleaness | NAS | ≤6(Class) | ||||||
| Gas content | % | ≤0.1 | ||||||
| Impurities content |
| 3-5Micron | ||||||
| Power Supply |
| 380V/3phase/50HZ （can be designed based on user’s requirement） | ||||||
| Noise | dB(A) | ≤75 | ≤75 | ≤75 | ≤78 | ≤78 | ≤78 | ≤80 |
| Demulsifying Value | min | New oil≤8,Operating oil≤15 | ||||||
| Heating Power | kw | 36 | 40 | 45 | 72 | 80 | 90 | 120 |
| Total Power | Kw | 38 | 42 | 47 | 75 | 87 | 101 | 135 |
| Diameter of inlet&outlet | mm | 25 | 25 | 25 | 32 | 42 | 50 | 50 |
| Wight | Kg | 450 | 550 | 600 | 750 | 850 | 1000 | 1200 |
| Dimension(mm) | Length | 1300 | 1350 | 1400 | 1500 | 1600 | 1650 | 1750 |
| Width | 900 | 950 | 1000 | 1150 | 1250 | 1300 | 1400 | |
| Height | 1600 | 1600 | 1650 | 1700 | 1700 | 1750 | 1950 | |
Preparation before use
1. All parts of the used hydraulic oil filtration system have been adjusted and tested before leaving the factory. When they are transported to the site of use, they must be checked whether they are in good condition.
2. The oil filter is placed smoothly, the oil inlet is connected to the oil discharge port at the lower part of the oil tank, and the oil outlet is connected to the upper part of the oil tank.
3. After long-distance transportation, it is necessary to re-tighten the connection parts of various components, such as connecting flanges, filter cover plates, etc.
所有评论仅代表网友意见，与本站立场无关。