3M™ Scotchlok™ Electrical IDC 314U is a self-stripping, flame retardant, electrical pigtail connector that has a maximum insulation of inches (3,9 mm) and a operating temperature of 221°F (105°C). Dry environment applications. The suggested application tool for this connector is the E-9BM Crimping 单体接线子及相关工具 1958年，3M公司发明了利用U型金属元件进行电缆芯线导体接续的个机械式接线子-------Scotchlok牌U型接线子。这一革命性的创造一举改变了传统电缆芯线扭接加焊的繁杂操作手续，提高了接续质量及生产效率，并为将来的大量数字传输如ISDN，ADSL，HDSL等等提供传输质量保证打下了良好基础。其优异的接续质量符合TIA/EIA 586A和ISO/IEC 11801:1995对于高速连接的5类线要求,并获得。一般来说，通信市话电缆的接续要求有以下几点：（1）金属与金属相互的接触点必须是气闭的；（2）接触点处要长期保证牢固、稳妥及持久的压力以防止接触电阻增大；（3）金属之间之接触点必须是“面"接触而不是“点"接触，以增加电气 性能；（4）接触部位应有适当的防潮措施。 U型金属元件的原理，满足了上述几个重要技术的要求。导体在插入U型元件的的槽内时被剥除，元件两个平片形成压力，使导体外原有氧化薄膜被去除进而改变了导体的形状，使之呈椭圆形，增加了接触面积，同时维持了良好持久的导体抗拉强度，从物理性能和电气性能上达到了与焊接相同的水平3M的单体扣式接线子系列包括以下几种:(1)UR(红盖)、UP3(白盖供纸绝缘芯线)、UY2(黄盖)、ULG(墨绿盖供大线 径至) 以上几个品种可接二根或三根芯线()(2)UY(黄盖)、UP2(白盖同UP3)，以上两个品种可接两根芯线( )(3)UB(蓝盖)、UG(墨绿盖)、复接性接线子，可进行不断线复接，UB2A可 接续,UG可接续.有关接线子的分类及选择。 Scotchlok 单体接线子及相关工具 1958年，3M公司发明了利用U型金属元件进行电缆芯线导体接续的个机械式接线子-------Scotchlok牌U型接线子。这一革命性的创造一举改变了传统电缆芯线扭接加焊的繁杂操作手续，提高了接续质量及生产效率，并为将来的大量数字传输如ISDN，ADSL，HDSL等等提供传输质量保证打下了良好基础。其优异的接续质量符合TIA/EIA 586A和ISO/IEC 11801:1995对于高速连接的5类线要求,并获得。一般来说，通信市话电缆的接续要求有以下几点：（1）金属与金属相互的接触点必须是气闭的；（2）接触点处要长期保证牢固、稳妥及持久的压力以防止接触电阻增大；（3）金属之间之接触点必须是“面"接触而不是“点"接触，以增加电气 性能；（4）接触部位应有适当的防潮措施。 U型金属元件的原理，满足了上述几个重要技术的要求。导体在插入U型元件的的槽内时被剥除，元件两个平片形成压力，使导体外原有氧化薄膜被去除进而改变了导体的形状，使之呈椭圆形，增加了接触面积，同时维持了良好持久的导体抗拉强度，从物理性能和电气性能上达到了与焊接相同的水平3M的单体扣式接线子系列包括以下几种:(1)UR(红盖)、UP3(白盖供纸绝缘芯线)、UY2(黄盖)、ULG(墨绿盖供大线 径至) 以上几个品种可接二根或三根芯线()(2)UY(黄盖)、UP2(白盖同UP3)，以上两个品种可接两根芯线( )(3)UB(蓝盖)、UG(墨绿盖)、复接性接线子，可进行不断线复接，UB2A可 接续,UG可接续.有关接线子的分类及选择。 Scotchlok 单体接线子及相关工具 1958年，3M公司发明了利用U型金属元件进行电缆芯线导体接续的个机械式接线子-------Scotchlok牌U型接线子。这一革命性的创造一举改变了传统电缆芯线扭接加焊的繁杂操作手续，提高了接续质量及生产效率，并为将来的大量数字传输如ISDN，ADSL，HDSL等等提供传输质量保证打下了良好基础。其优异的接续质量符合TIA/EIA 586A和ISO/IEC 11801:1995对于高速连接的5类线要求,并获得。一般来说，通信市话电缆的接续要求有以下几点：（1）金属与金属相互的接触点必须是气闭的；（2）接触点处要长期保证牢固、稳妥及持久的压力以防止接触电阻增大；（3）金属之间之接触点必须是“面"接触而不是“点"接触，以增加电气 性能；（4）接触部位应有适当的防潮措施。 U型金属元件的原理，满足了上述几个重要技术的要求。导体在插入U型元件的的槽内时被剥除，元件两个平片形成压力，使导体外原有氧化薄膜被去除进而改变了导体的形状，使之呈椭圆形，增加了接触面积，同时维持了良好持久的导体抗拉强度，从物理性能和电气性能上达到了与焊接相同的水平3M的单体扣式接线子系列包括以下几种:(1)UR(红盖)、UP3(白盖供纸绝缘芯线)、UY2(黄盖)、ULG(墨绿盖供大线 径至) 以上几个品种可接二根或三根芯线()(2)UY(黄盖)、UP2(白盖同UP3)，以上两个品种可接两根芯线( )(3)UB(蓝盖)、UG(墨绿盖)、复接性接线子，可进行不断线复接，UB2A可 接续,UG可接续.有关接线子的分类及选择。 Scotchlok 单体接线子及相关工具 1958年，3M公司发明了利用U型金属元件进行电缆芯线导体接续的个机械式接线子-------Scotchlok牌U型接线子。这一革命性的创造一举改变了传统电缆芯线扭接加焊的繁杂操作手续，提高了接续质量及生产效率，并为将来的大量数字传输如ISDN，ADSL，HDSL等等提供传输质量保证打下了良好基础。其优异的接续质量符合TIA/EIA 586A和ISO/IEC 11801:1995对于高速连接的5类线要求,并获得。一般来说，通信市话电缆的接续要求有以下几点：（1）金属与金属相互的接触点必须是气闭的；（2）接触点处要长期保证牢固、稳妥及持久的压力以防止接触电阻增大；（3）金属之间之接触点必须是“面"接触而不是“点"接触，以增加电气 性能；（4）接触部位应有适当的防潮措施。 U型金属元件的原理，满足了上述几个重要技术的要求。导体在插入U型元件的的槽内时被剥除，元件两个平片形成压力，使导体外原有氧化薄膜被去除进而改变了导体的形状，使之呈椭圆形，增加了接触面积，同时维持了良好持久的导体抗拉强度，从物理性能和电气性能上达到了与焊接相同的水平3M的单体扣式接线子系列包括以下几种:(1)UR(红盖)、UP3(白盖供纸绝缘芯线)、UY2(黄盖)、ULG(墨绿盖供大线 径至) 以上几个品种可接二根或三根芯线()(2)UY(黄盖)、UP2(白盖同UP3)，以上两个品种可接两根芯线( )(3)UB(蓝盖)、UG(墨绿盖)、复接性接线子，可进行不断线复接，UB2A可 接续,UG可接续.有关接线子的分类及选择。 ?314* Moisture " (3,94 mm) 22-14 (0,5-1,5) 105°C (221°F) Resistant Seal 314U* Dry Environment " (3,94 mm) 22-14 (0,5-1,5) 105°C (221°F) Applications 316IR Moisture Resistant " (3,94 mm) 22-16 (0,5-1,5) 105°C (221°F) — Applications 557* Dual Element " (3,05 mm) 22-16 (0,5-1,5) 105°C (221°F) Connection 558* Flame " (3,05 mm) 22-16 (0,5-1,5) 105°C (221°F) Retardant 560 Flame " (3,68 mm) 18-16 (0,75-1,5) 105°C (221°F) Retardant Solid/Stranded 14 Stranded 560B Run & Tap " (3,68 mm) 18-16 (0,75-1,5) 90°C (194°F) Splicing Solid/Stranded 14 Stranded 560N Flame " (3,68 mm) 18-16 (0,75-1,5) 105°C (221°F) Retardant Solid/Stranded 14 Stranded 562 Run & Tap " (4,82 mm) 12-10 (3,0-4,0) 90°C (194°F) Splicing Solid/Stranded 10 Stranded 564 Dry Environment " (3,68 mm) 18-14 (0,75-1,5) 90°C (194°F) Applications 567 Dual Element " (3,68 mm) 18-14 (0,75-1,5) 105°C (221°F) Connection Tap Tap " (4,82 mm) 12-10 (3,0-4,0) Run Run 804 Moisture " (3,68 mm) 18-16 (0,75-1,5) 75°C (167°F) Resistant Solid/Stranded Applications 14 Stranded 804U Dry Environment " (3,68 mm) 18-16 (0,75-1,5) 75°C (167°F) Applications Solid/Stranded 14 Stranded 901 Disconnect " (3,68 mm) 18-14 (0,75-1,5) 90°C (194°F) — 905 Low Voltage " (2,79 mm) 22-18 (0,5-1,0) 90°C (194°F) (Automotive) Tap Tap Applications " (3,68 mm) 18-14 (0,75-1,5) Run Run 905N Low Voltage " (2,79 mm) 22-18 (0,5-1,0) 90°C (194°F) — (Automotive) Tap Tap Applications " (3,68 mm) 18-14 (0,75-1,5) Run Run 951 T-Tap Disconnect " (3,81 mm) 22-18 (0,5-1,0) 105°C (221°F) 952 T-Tap Disconnect " (3,81 mm) 18-14 (0,75-1,5) 105°C (221°) 953 T-Tap Disconnect " (3,81 mm) 12 (3,0) 105°C (221°) 972 Fuse Holder " (3,81 mm) 18-14 (0,75-1,5) 90°C (194°F) — Type Special Maximum AWG (mm2) Operating UL, CSA or CE Connector Connector Features Insulation Wire Range Temperature Certified ?557 IDC* 560B IDC 972 IDC Application: Electrically connects two Application: Electrically connects a Application: Used to install a blade wire ends and insulates the connection. (tap) wire end to a through (run) wire type automotive fuse between power • Designed for control circuit wiring, and insulates the connection. source and device. fixture wiring, appliance wiring, • For general-purpose electrical • Self-stripping. signal and PA systems, connections on auto, boat, van or • In-line fuse holder. automotive/boat/RV wiring. • Flame retardant. trailer. • Used for tap and parallel splicing. 951, 952, & 953 IDCs • Used for pigtail splicing. • Rated up to 600 volts. 567 562 804 804U 560B Application: Used to electrically tap into a wire in mid-span without cutting or stripping the wire. Connector then mates with 3M " (6,35 mm) male tabs, making a quick-connect wiring 558 connection. • Flame retardant. 558 IDC* 557 804 & 804U IDCs • Used for tap splicing. 951 Application: Electrically connects a (tap) wire end to a through (run) wire and insulates the connection. • Designed for control circuit wiring, fixture wiring, appliance wiring, signal and PA systems, automotive/boat/RV wiring. • Flame retardant. • Used for tap splicing. • Rated up to 600 volts. Application: Electrically connects a (tap) wire end to a through (run) wire; insulates and provides a moisture-resistant seal for the connection. The 804 connector is greased while the 804U connector is ungreased. • Sealant-filled connector is suitable for RV trailers, boats, fleet vehicles and other environmentally sensitive applications where corrosive elements such as UB2A & UB2A-D IDCs Application: UB2A makes a moisture-resistant butt splice connection between two solid-copper conductors of air-core or filled cable. 952 953 562 IDC Application: Electrically connects a (tap) wire end through a (run) wire and insulates the connection. road chemicals, salt spray and exhaust fumes might be encountered. • Used for tap splicing. UB2A-D connector makes a dry connection. • Sealant is a mineral oil-based grease. UR • Self-stripping. 972 905 UP2 • Used for tap splicing. UR2-D Color: Yellow 901 560 & 560N IDCs Application: Electrically connects a (tap) wire end to a through (run) wire and insulates the connection. 901 IDCs Application: Electrically taps into a wire in mid-span without cutting UG IDC UG ULG UP3 • Flame retardant. • Used for tap and parallel splicing. 560 564 or stripping the wire. Connector then mates with a " (4,0 mm) male snap plug, making a disconnectable connection. • Designed for quick connect/disconnect of electrical systems on pull-behind vehicles Application: Makes a moisture-resistant tap splice connection between two solid-copper conductors of air-core or filled cable. • Sealant is a mineral oil-based grease. 560N such as rental trailers, boats and UR2 & UR2-D IDCs 564 IDC Application: Electrically connects two through (run) wires and insulates the campers. • Used for tap splicing. 905 & 905N IDCs Application: UR2 connector makes a moisture-resistant butt splice connection between three solid-copper connection. • Used for parallel splicing. 567 IDC Application: Electrically connects a (tap) wire end to a through (run) wire and insulates the connection. conductors of air-core or filled cable. UR2-D connector makes a dry connection. Application: Electrically connects a (tap) wire end to a through (run) wire and insulates the connection. • Flame retardant. • Self-stripping. • Used for tap splicing. Color: Brown *Also tested in accordance with UL • Suitable for low-voltage accessories such as radios, stereo speakers, tape decks and CB radios. • Used for tap, in-line parallel and pigtail splicing. UY2 & UY2-D IDCs Application: UY2 connector makes a moisture-resistant butt splice connection between two solid-copper conductors of air-core or filled cable. UY2-D connector makes a dry Standard for Portable Electric Lamps, UL 153 section 15, when housed connection. • Sealant is a mineral within the body of the lamp. oil- based grease. ?557 IDC* 560B IDC 972 IDC Application: Electrically connects two Application: Electrically connects a Application: Used to install a blade wire ends and insulates the connection. (tap) wire end to a through (run) wire type automotive fuse between power • Designed for control circuit wiring, and insulates the connection. source and device. fixture wiring, appliance wiring, • For general-purpose electrical • Self-stripping. signal and PA systems, connections on auto, boat, van or • In-line fuse holder. automotive/boat/RV wiring. • Flame retardant. trailer. • Used for tap and parallel splicing. 951, 952, & 953 IDCs • Used for pigtail splicing. • Rated up to 600 volts. 567 562 804 804U 560B Application: Used to electrically tap into a wire in mid-span without cutting or stripping the wire. Connector then mates with 3M " (6,35 mm) male tabs, making a quick-connect wiring 558 connection. • Flame retardant. 558 IDC* 557 804 & 804U IDCs • Used for tap splicing. 951 Application: Electrically connects a (tap) wire end to a through (run) wire and insulates the connection. • Designed for control circuit wiring, fixture wiring, appliance wiring, signal and PA systems, automotive/boat/RV wiring. • Flame retardant. • Used for tap splicing. • Rated up to 600 volts. Application: Electrically connects a (tap) wire end to a through (run) wire; insulates and provides a moisture-resistant seal for the connection. The 804 connector is greased while the 804U connector is ungreased. • Sealant-filled connector is suitable for RV trailers, boats, fleet vehicles and other environmentally sensitive applications where corrosive elements such as UB2A & UB2A-D IDCs Application: UB2A makes a moisture-resistant butt splice connection between two solid-copper conductors of air-core or filled cable. 952 953 562 IDC Application: Electrically connects a (tap) wire end through a (run) wire and insulates the connection. road chemicals, salt spray and exhaust fumes might be encountered. • Used for tap splicing. UB2A-D connector makes a dry connection. • Sealant is a mineral oil-based grease. UR • Self-stripping. 972 905 UP2 • Used for tap splicing. UR2-D Color: Yellow 901 560 & 560N IDCs Application: Electrically connects a (tap) wire end to a through (run) wire and insulates the connection. 901 IDCs Application: Electrically taps into a wire in mid-span without cutting UG IDC UG ULG UP3 • Flame retardant. • Used for tap and parallel splicing. 560 564 or stripping the wire. Connector then mates with a " (4,0 mm) male snap plug, making a disconnectable connection. • Designed for quick connect/disconnect of electrical systems on pull-behind vehicles Application: Makes a moisture-resistant tap splice connection between two solid-copper conductors of air-core or filled cable. • Sealant is a mineral oil-based grease. 560N such as rental trailers, boats and UR2 & UR2-D IDCs 564 IDC Application: Electrically connects two through (run) wires and insulates the campers. • Used for tap splicing. 905 & 905N IDCs Application: UR2 connector makes a moisture-resistant butt splice connection between three solid-copper connection. • Used for parallel splicing. 567 IDC Application: Electrically connects a (tap) wire end to a through (run) wire and insulates the connection. conductors of air-core or filled cable. UR2-D connector makes a dry connection. Application: Electrically connects a (tap) wire end to a through (run) wire and insulates the connection. • Flame retardant. • Self-stripping. • Used for tap splicing. Color: Brown *Also tested in accordance with UL • Suitable for low-voltage accessories such as radios, stereo speakers, tape decks and CB radios. • Used for tap, in-line parallel and pigtail splicing. UY2 & UY2-D IDCs Application: UY2 connector makes a moisture-resistant butt splice connection between two solid-copper conductors of air-core or filled cable. UY2-D connector makes a dry Standard for Portable Electric Lamps, UL 153 section 15, when housed connection. • Sealant is a mineral within the body of the lamp. oil- based grease. 重要提示：购买前请联系卖家确认数量及价格，以上所示价格均为参考价格，直拍无效。： 黎小姐电话：微信：LCL 地址：深圳市南山区前海路9号前海广场1A