ZSFJ-C-1880/3150/3650高速全伺服卫生纸生产线
ZSFJ-C-1880/3150/3650 High Speed Automatic Perforating Rewinder
ZSFJ-C型高速全自动压边纹复卷机采用*的PLC电脑编程技术、变频调速、配置有触摸式多画面人机界面操作系统。整机采用伺服电机控制，运行速度快，噪音小，产量高。
主要特点:
1、全自动纸管更换装置,不需人工穿纸管,完成复卷后自动送出成品,立即复位复卷,在1分钟内可随意调节任何一种规格的纸管.
2、复卷成型后自动送出系统,采用机械臂推料的技术能顺利送出成品,最小推出成品直径50mm;
3.自动修边、喷胶、封口同步一次完成，该装置替代传统水线修边，实现国外流行的修边粘尾技术,成品留有10~18mm的纸尾,方便启用,减少普通复卷机制作时纸尾的损耗,从而降低产品本;
4、采用*的PLC编程技术,成品在复卷过程中实现先紧后松多级不同的松紧度,解决成品因长时间储存纸芯松离的现象;
5、原纸监控系统,在高速运转的过程中对原纸实时监控,确保设备正常运转；
6、无芯卷纸成型复卷系统,改变了以往抽芯复卷的传统工艺,达到实心的效果,降低人工成本,使成品更加美观；
7、高精度螺旋软刀,6刀打孔噪音低,打孔更加清晰,变速箱调节范围更大；
8、单层卧式退纸架,气动上纸,气动式宽皮带送纸,每层有伺服电机独立控制；
9、采用前后点动开关牵引原纸,操作更简便、更安全。
The high speed automatic edge embossing rewinder adopts the advanced technology of PLC computer programming, variable frequency speed regulating, electronic braking, and touch button type LCD screen operation control panel. The machine adopts servo motor control, running speed, low noise, high output, and all the shafts are driven by synchronous belt, so the overall structure is stable and reliable And we independently develop long-distance communication service system. It can detect the machine running at any time. Also the machine is newly added coreless roller rewinding system, it adopts PLC windpipe-shaped new technology. It is no need to put core or stainless steel pipe
Main features：
1. Automatic core loading and replacing. The logs are automatically pushed out after finishing winding, and then start winding again. The cores can be adjusted to any size of cores within one minute.
2. After finished winding the roller pushed out automatically. It's adopt mechanism arm pusher to push the roller out. The minimum diameter of finished roll is 60mm.
3 Automatic trimming, gluing and sealing: it has replaced the traditional sealing of rolls with the international popular trimming and sealing, which can have 10-18mm tails to facilitate to start pulling out the paper. At the same time, it can greatly cut down the wastage of the paper, thus to cut down the production cost.
4. Advanced PLC programmable control technology: The winding profiles can be tight at the beginning of winding, and then getting loose, to avoid the problems that the cores are loose from the rolls after long time storage.
5 Automatic detection of paper break and paper wrap up: to guarantee the high quality of the finished rolls even in the high speed operation.
6. Coreless rewinding system has changed the traditional method to take out the core to make high quality solid coreless roller. Reducing the manpower.
7. With high precision screwy perforation knife With6 perforation blades to make clear perforating. The perforating pitch controlled by gear box.
8.One backstand, pneumatic jumbo roll loading, and pneumatically wide belt paper unwinding driving, and individual web tension control unit for each jumbo roll.
9. The web can be threaded on the machine by the two jog buttons, It's more safety ａnd easier to feed the web.
技术参数 | |||
机器型号 Machine Model | 1880 | 3150 | 3650 |
宽度(mm） Raw Material Width | 2100 | 3000 | 3500 |
成品直径(mm） Finished Roll Diameteo | Φ60~130(松紧可调） Φ60-130 mm(Tightness adjustable) | ||
成品纸芯内径(mm) Finished Roll Core Diameter | Φ35-50m
| ||
原纸直径(mm) Raw Material Diameter | Φ1300/1500(其他规格请) Φ1300/1500 mm(Other sizes are available) | ||
原纸纸芯内径 Raw Material Core Diameter | 3’,(其它规格请) 3’( mm）(other sizes are available） | ||
打孔节距(mm)(请） Perforation Pitch (to be appoint) | 4刀,90~160mm; 4 perforating blade 90-160mm: | ||
加工能力 Speed | 180-300米/分钟 180-300m/min | ||
参数设定 Parameter Setting | 触摸式多画面人机界面操作系统 LCD Screen operation pane | ||
编程控制器 Programmable controller | 三菱PLC电脑编程 MITSUBISH Programmable Controller PLC | ||
退纸架 Unwinding Unit | 1-3层(层数请） 1-3ply,15-30gsm | ||
气动系统 Pneumatic System | 3匹空压机,最少压力5kg/cm2Pa(客户自备) 3 HP air compressor, Mini pressure 5kg/cm Pa(Provided by clienti) | ||
动力 Power | 变频调速 VFrequency conversion speed regulator, kw | ||
外型尺寸(mm) (L*W*H) Dimension(L*W*H) | 6200X2600x1800-6800X4000x2000 | ||
机器重量 Weight | 3800-9000kg | ||
选配项(需订购) Option | |||
压花 Embossing Unit | 单压花,双面压花,钢对钢压花Single ply embos- sing, double ply embossing, steel to steel embossing | ||
压花底辊 Bottom Embossing Roller | 毛布辊,羊毛辊,胶辊 Felt roller, Paper roller, Rubber roller | ||
退纸架 Unwinding Unit | 1-3层 1-3 ply | ||
退纸架传动 Unwinding Unit Driving | 伺服电机传动 Servo motor drive | ||
压边纹 Edge Embossing Unit | 钢对钢 Steel to steel | ||
打孔方式 Perforating Unit | 气动分离 Pneumatically separating unit | ||
压光 Calendering Unit | 钢对钢,钢对胶 Steel to steel, steel to rubber | ||
远程通讯服务系统 Modem | 需订购 Option | ||
| 仟渔 | https:/// |
所有评论仅代表网友意见，与本站立场无关。