广告招募

当前位置:亚洲制造网 > 技术中心 > 所有分类

上海世博会期间都市气溶胶特性研究

2023年09月08日 10:11:00      来源:瑞士万通中国有限公司 >> 进入该公司展台      阅读量:47

分享:

Urban Aerosol Characteristics during the World Expo 2010 in Shanghai

2010年上海世博会期间都市气溶胶特性研究

During the World Exposition 2010, which ran from May to October, emission control measures were implemented inShanghai and surrounding areas to improve the air quality. This study evaluated the effects of regional transport on aerosolcharacteristics under these controlled local emission conditions using a month’s worth of observations of the aerosol number size distributions (10 nm–10 μm) and the chemical compositions of the aerosols. Back-trajectories and a Lagrangian dispersion model were combined to analyze the transport characteristics of regional and local air pollution and the related mechanisms. Two classes of aerosols were identified and compared. Class I was a clear air condition with ocean-oriented air masses. Particle counts in this class were dominated by particles in the size range 20–40 nm, and NH4+ was mainly present in the form of (NH4)2SO4. A strong peak at noontime indicated that the particle formation or growth process was promoted by the photochemical process. Class II was characterized as a regional transport pollution condition with air masses originating in the surrounding areas. The analysis showed increases in particle number concentrations and total water soluble ions of about 17% and 350%, respectively, compared with Class I episodes. The fraction of particles in the size range 50–200 nm increased sharply to almost 50% of the total particle counts. An examination of the diurnal pattern and major water soluble ions suggested that the increase in size mode (50–200 nm) particles was mainly due to the particle growth

process and the presence of enough precursor gases. NH4+ was present in the form of (NH4)2SO4 and NH4NO3. Although air control measures during the World Expo significantly limited local emissions, our results indicate that the regional transport from surrounding cities was responsible for the higher trace gases and particle volume concentrations, along with

the large number of Aitken mode particles.

版权与免责声明:
1.凡本网注明"来源:亚洲制造网"的所有作品,版权均属于亚洲制造网,转载请必须注明亚洲制造网。违反者本网将追究相关法律责任。
2.企业发布的公司新闻、技术文章、资料下载等内容,如涉及侵权、违规遭投诉的,一律由发布企业自行承担责任,本网有权删除内容并追溯责任。
3.本网转载并注明自其它来源的作品,目的在于传递更多信息,并不代表本网赞同其观点或证实其内容的真实性,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品来源,并自负版权等法律责任。 4.如涉及作品内容、版权等问题,请在作品发表之日起一周内与本网联系。