美国Spectronics公司生产的SB-100P高强度紫外线灯|美国Spectronics公司生产的spectroline系列紫外线荧光探伤灯

产品性能：
高效、通用：SB-100P紫外灯产生强度紫外线，而没有可见光(可见光强度低于20勒克斯)。适合于多种应用，包括无损检测(NDT)、质量控制、荧光渗漏检测、紫外固化、污物检测等。
可选择聚光及散光均匀照射灯泡，满足多种应用要求：SB-100P提供聚光及散光均匀照射两种灯泡，平均寿命为5000小时。聚光灯泡在15英寸(38cm)距离下产生稳定的365nm波长紫外线，中心强度为4800µW/cm²；而均匀照射散光灯泡在15英寸(38cm)距离下产生更宽的光束，强度为1200µW/cm²。没有可见光(可见光强度低于20勒克斯)，满足美军标及航空工业规范要求。

美国Spectronics公司生产的SB-100P高强度紫外线灯周到的设计：SB-100P的设计以用户的需要为出发点。灯头及变压器外壳由结实的工程聚合材料制成，防凹痕、裂纹及划伤。电源线由防热防裂材料做成。电源线从常冷的舒适的手柄中出来，可以防止缠结。防裂的回火处理过的滤色片戏剧性地减少了更换成本。既可以手拿手柄操作，也可以将手柄插入变压器杆中，此时，灯头可以方便地旋转360°。
特的Bulb-Saver 灯泡固定架：为了减少灯泡损坏，我们提供的Bulb-Saver灯泡固定架。它使正常操作过程中灯泡的运动降至低，从而减少灯泡损坏。
结实、可靠、安全：为了减少电击危险，SB-100P配有的防热，三线电源线及封装隔离的镇流器。从外接电源到变压器主电源线及从变压器到紫外灯头的次电源线长度均为8英尺(2.5m)长。同时可提供SB-100PX，主电源线长8英尺(2.5m)，次电源线长14.5英尺(4.5m)，而SB-100PXR主电源线长14.5英尺(4.5m)，次电源线长20英尺(6m)长。灯头仅7.5英寸(19cm)长，2.5磅(1.1kg)重。SB-100P为UL及CE认可。
同时可提供CSA认可型号。整个紫外灯，包括变压器，重量为11.5磅(5.2kg)。
柔性，硅胶滤色片套不需要任何工具，就可更换灯泡及滤色片。
紫外防护眼镜---购买SB-100P赠送一副紫外防护眼镜。

产品型号后缀“ /FA、/FC "表示为中国电压230V

我司维修美国Spectronics（简称SP）公司生产的光谱Spectroline系列MODEL FC-100 /FA 、SB-100P /FA高强度紫外线灯
高压汞灯式紫外线探伤灯的灯泡寿命为800-5000小时，此类型探伤灯启动时间为5-10分钟，关闭后仍然要等待大约5分钟才能启动，所以不要频繁开关机。此类型探伤灯在工作期间严禁晃动灯头，否则灯泡易烧毁。同时，如果供电电压不稳，同样会造成灯泡损坏。此类型探伤灯的安定器为高压电路，灯泡启动电压在5000v左右。如果不亮，请先用万用表检查电源插座电压是否正常，再检查探伤灯保险是否导通，如果都正常，更换全新灯泡测试，新灯泡如果不亮，那确定是安定器稳压器损坏，请联我司维修工程师。


SB-100PR 带有30英尺(9米)长吊轮：现在，我们将SB-100P高强度紫外灯及“吊轮"的方便性结合在一起。吊轮配有30英尺(9米)长电源线，从而方便您的操作。

美国Spectronics公司生产的SB-100P高强度紫外线灯的产品特点：
强度紫外输出，没有可见光！
SB-100P高强度紫外线灯-365nm黑光灯
可选择点聚光点灯泡或散光面积灯泡
特的Bulb-Saver灯泡固定架减少灯泡振动，延长使用寿命
特的防撞及防凹外壳由上等工程聚脂制成
柔性的硅胶滤色片固定套让您快速、轻松地更换灯管，不需任何工具。
灯头工体工学设计，易于操作。
SB-100P高强度紫外线灯特别适合于
无损检测(NDT)
质量控制
荧光渗漏检测
紫外固化
污物检测
SB-100P产生的强度紫外线，而没有可见光(可见光强度低于20勒克斯)。适合于多种应用，包括无损检测(NDT)、质量控制、荧光渗漏检测、紫外固化、污物检测等。提供聚光及散光均匀照射两种灯泡，平均寿命为5000小时，配有的防热，三线电源线及封装隔离的镇流器。

美国Spectronics公司生产的SB-100P高强度紫外线灯的系列的全部产品的技术参数：

USA Designed for maximum efficiency and versatility.
The SB-100P 100-watt UV lamp produces super-high UV intensity without excess visible light! Developed to make your work easier, the SB-100P is precision-engineered for use in countless applications. It is perfect for nondestructive testing, quality control, UV curing, leak detection and much more.

Choice of spot or flood bulbs provides widest range of applications.
The SB-100P can be equipped with your choice of two bulbs, each with a rated life of 5,000 hours. The spot bulb provides a concentrated beam with a steady-state 365nm intensity of 4,800 µW/cm² at 15 inches
(38 cm), while the flood bulb (available with 120V and 100V models only) produces a broader beam of 1,200 µW/cm² at 15 inches. The SB-100P has a very low visible light emission of under two foot-candles (20 lux) to assure compliance with military and aerospace industry specifications.

Combines new state-of-the-art innovations with proven features.
The SB-100P was designed with the needs of the industry in mind. Its lamp head and transformer base housings are constructed of a rugged engineering polymer that virtually eliminates dents, cracks and scratches. The cord is made of a heat-ａnd crack-resistant material. It exits from the stay-cool, contoured handle, which prevents tangling. The crack-resistant, tempered filter dramatically reduces replacement costs. The lamp head easily lifts from the metal handle of the transformer base for comfortable hand-held use. For bench use, it can be conveniently rotated 360° when mounted on the base handle. The SB-100P is now more effective than ever with a positioning pin that enables inspection at a 45° angle.

Unique Bulb-Saver™ extends bulb life.
To greatly reduce replacement costs due to broken bulbs, we include our unique Bulb-Saver at no extra charge. It minimizes bulb movement during normal handling, reducing the risk of breakage.

Tough, dependable and safe.
To reduce shock hazard, the SB-100P comes equipped with a special heat-resistant, 3-wire secondary cord and a fully enclosed encapsulated ballast. The primary and secondary cords are both 8-feet (2.5 m) long. Also available are the SB-100PX which comes with a 20-foot (6m) secondary cord and the SB-100PXR which is equipped with 20-foot primary and secondary cords. The lamp head is only 7.5 inches (19 cm) long and weighs just 2.5 lbs. (1.1 kg). The SB-100P is UL listed and CE approved; a CSA-approved version is also available. The entire unit, including the transformer base, weighs 11.5 pounds (5.2 kg).

Flexible, silicone rubber filter holder.
The filter holder is easily removable without tools for bulb or filter replacement.

FREE UV-absorbing glasses included with every lamp.
The USA SB-100P, SB-100PX, SB-100PXR lamps
are available for these line voltages:
120V/60Hz 230V/50Hz 240V/50Hz 100V/50-60Hz

"Flying Reel" Version
usa SB-100PR High-Intensity Ultraviolet Lamp with 35 Foot Retractable Cord
Now, we've combined the high performance features of our SB-100P high-intensity ultraviolet lamp with the operator convience only a "flying reel" can provide. With its 35 foot retractable cord, the Spectroline SB-100PR lamp assures that no job will ever again be out of reach.