ONT-365-ONT-365模块式大面积LED高强度紫外照射系统On-Track-上海耀壮检测仪器设备有限公司

ONT-365模块式大面积LED高强度紫外照射系统On-Track的产品介绍：

ONT-365 On-Track™是的大面积LED高强度紫外照射系统。配有四个散光大面积照射LED紫外灯，每一个紫外灯配有三个强度UVA长波(波长365nm)LED灯泡用于检测，以及一个白光LED灯泡用于工作照明。ONT-365头顶照射系统允许用户按照自己的检测要求自行移动灯的位置或增订紫外灯头。特别适合于需要大面积均匀照射的应用。

ONT-365模块式大面积LED高强度紫外照射系统On-Track的：

风冷运行，高效LED紫外灯泡，平均使用寿命30000小时。

大面积照射

电子强度稳定器确保LED灯泡的一致性能

即开操作，开启后立即达到高紫外强度。

内置风扇，保证LED有效散热，从而保证佳紫外输出。

开启紫外灯时，可见光泄露小于20勒克斯(Lux)。

滤色片保护器防止灯泡损坏。

可以根据需要增回紫外灯头数量(紫外灯头可单购买)以满足特定的检测要求。

可选远程控制器，带三位置开关，操作方便。

随机配有一付UVS-30紫外防护眼镜。

ONT-365模块式大面积LED高强度紫外照射系统On-Track的技术参数：

规格	ONT-365
光源	灯头配有3个长波UVA(365nm)紫外LED灯泡及一个白光LED灯泡
灯头直径	3.25英寸(8.3cm)
工作台尺寸	(长x宽x高) 28.5x18.3x2.5英寸(72x46x6cm)
紫外强度	15英寸距离(38cm):9000 uw/cm2
24 英寸距离	(61cm):5000 uw/cm2
36 英寸距离	(91cm):4000 uw/cm2
工作台重量	13磅 (5.9 kg )
电源线长度	8 英尺(2.4m)
电源输入	100-240V交流(50/60Hz)，输出12V直流

ONT-365 UV-A/White Light LED Inspection System

The ONT-365 On-Trak™ is an innovative, track light-style modular inspection system. It features four broad-beam lamps, each of which utilizes three powerful, ultra-high-flux UV-A (365 nm) LEDs for inspection plus one white light LED for general illumination. This overhead lighting system allows inspectors to customize lamp beam patterns to suit their individual needs. Two lamp head assemblies can be added, as desired, to increase the coverage area. Perfect for NDT inspection booths, pre-inspections and screening applications requiring maximum uniformity of coverage over large areas.

Features:

Cool-running, energy-efficient LEDs with 30,000-hour service life

Broad-beam profiles provide wide coverage area

Electronic Intensity Stabilizers ensure consistent LED performance

Instant-on operation; lamps reach full intensity immediately

Built-in fans keep LEDs cool to maintain optimum UV-A intensity during extended use

Produces less than 2 foot-candles of visible light

Filter protectors with rubber bumpers and Borofloat® glass lenses prevent damage to LEDs

Easily customizable! Move, adjust and add up to two lamp heads according to your specific inspection requirements (additional lamp heads sold separately)

Optional remote control with three-position rocker switch provides added convenience and versatility

Comes complete with UVS-30 UV-absorbing spectacles

The ONT-365 On-Trak™ NDT inspection system is a customizable, track light-style modular system attached to a mountable platform. It features four broad-beam LED lamp assemblies, each with three ultra-high intensity UV-A (365 nm) LEDs and one white light LED. Provides UV-A flood coverage that is ideal for a variety of NDT applications.
Specifications：

Product Number	ONT-365
Light Sources	3 UV-A LEDs and 1 white light LED per lamp head
Lamp Head Diameter	3.25 in (8.3 cm)
Platform dimensions (L x W x H)	28.5 x 18.3 x 2.5 in (72 x 46 x 6 cm)
Platform weight	13 lb (5.9 kg)
Power supply cord	8 ft (2.4 m)
Power supply	Input: 100-240 VAC 50/60 Hz Output: 12 VDC
Nominal steady-state UV-A (365 nm) intensity	15 in (38 cm) — 9,000 μW/cm² 24 in (61 cm) — 5,000 μW/cm² 36 in (91 cm) — 4,000 μW/cm²