SONY XC-56BB-深圳市轩展科技有限公司

Designed to comply with the pin-out of Sony’s discontinued XC-55BB camera, Sony’s new two piece, black and white progressive scan video camera - the XC-56BB - incorporates a 1/3-type progressive scan CCD that produces detailed, VGA resolution images at a high frame rate (30 fps).

• 1/3 inch Progressive Scan CCD with square pixels

• Non-TV format

• Square lattice/Full pixel read-out

• Effective Picture Elements - 659 (H) x 494 (V)

• NF Lens Mount

• High Rate Scan /Binning Function - 30 frames per sec./60 frames per sec. Binning

• Sync System - Internal/External (auto)

• External Sync System - HD/VD (2 to 5 Vp-p)

• Gain - Manual/Fixed switchable

• Gamma - OFF (y=1)

• High Shock and Vibration Resistance

• Miniature Size

• External Trigger Shutter: 1/4 to 1/100,000 sec

• Cable length: 2 m

• Lead-free soldering

• Same Pin Assignment as XC-55BB camera

SPECIFICATIONS	XC-56BB
Image Device	1/3 type Progressive Scan CCD
Effective Pixel Elements (HxV)	659 X 494
Effective Lines (HxV)	647 X 493
Output Image Size	VGA class (647 x 494)
Cell Size (HxV)	7.4 x74.4 μm
Lens Mount	NF mount
Flange Focal Length	12.0 mm
Sync System	Internal/External (automatically switched according to input signal
External Synchronisation	HD/VD (HD/VD level: 2 to 5 Vp-p)
Input / Output	HD/VD (2 to 5 Vp-p 75 Ω)
Alowable Frequency Deviation	± 1% (in horizontal synchronous frequency)
of External Synchronisation	1.0 Vp-p, sync negative, 75 Ω, unbalanced
H Jitter	Less than 20 ns
Scan Lines	525-lines/236-lines (Normal mode/Binning mode)
Video OutputMode	Normal: 1 -line sequential output 29,97 fps / Binning: F2 -line sequential output 59,94 fps
Video Output	1.0 Vp-p, sync. Negative, 75 ! , unbalanced
Horizontal Frequency	15,734 KHz
Output Signal Frequency	29,97 Hz (Normal mode)/59,94 Hz (Binning Mode)
Horizontal Resolution	500 TV lines
Sensitivity	400 lx (F8, y= OFF, FIX GAIN (0dB)
Minimum Illumination	0,5 lx (F1,4 y= OFF, GAIN + 18dB)
S/N Ratio	58 dB
Gain	Fixed/Manually Adjustable
Gamma	1 (fxed)
White Clip	820 mV ± 70mV
Shutter Mode	Normal Shutter, Restart/Restet, External Trigger shutter mode (Mode1/Mode2)
Normal Shutter Speed	1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/15000 s
External Trigger Shutter	DIP switch setting 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/10000 s, 1/25000, 1/50000, 1/100000 s Trigger pulse width settings: 1/4 to 1/100000 s
External Trigger	Polarity: +, 2μs to 250 ms ; Input impedence: 10k! or more (H:+2 to 5,0V, L: 0 +0,6V)
Pin Assignment	Correspondence to EIAJ compliant 12PIN connector pin assignment Unvailable (No.8 pin: Trigger input (G), No.9 pin: Trigger input, No. 10 pin: GRD, No. 11 pin: + 10V) Pins 0 and 11 are not connected inside the camera
Power Requirements	+12 V DC (range: +10.5 to 15V)
Power Consumption	2.2 W
Dimensions (WxHxD)	CHU: 22 x 22 x 30 mm
CCU: 29 x 29 x 67 mm
Mass	CHU: Approximately 40g
CCU: Approximately 100g
Operating Temperature	-5 to 45°C
Storage Temperature	-30 to 60°C
Performance Guarantee Temperature	0 to 40°C
Operating Humidity	20 to 80% (no condensation)
Storage Humidity	20 to 95% (no condensation)
Vibration Resistance	10G (20Hz to 200Hz)
Shock Resistance	70 G
MTBF	73.800 Fit (appox. 8,4 years)
Regulation	UL 6500, FCC Class A Digital Device, CE (EN61326/97 + A1/98)
Supplied Accessories	Lens mount cap (1), Operating Instructions (1), Dedicated cable (1), Ferrite core (1)