Introducation
The DIR seies machine can recycle gasoline engine oil, diesel engine oil, mineral oil, synthetic oil, motor oil, transmission oil, hydraulic oil and other lubricant oil to clean oil, like SN150,SN300,SN350,SN500. The recovery rate of this machine is more than 85%. Only need to add one chemical, named catalyst, percentage:2%-5%,Our company developed a kind of composite catalyst, through catalyzing, the harmful substances are selectively processed, for example, polymerization, shielding, passivation effect and discharged as residues, so as to remove the unstable factors of the waste lubricating oil, make it became qualified. It is environmental friendly.
Charactor:
The waste engine oil distillation machine is used to handle waste engine oil into base oil, the final base oil is SN150 and SN300. The color is ~2.
Low cost contain:
1) only need the catalyst chemical, the cost is less thanUS$30 to refine one ton waste oil.
2) Heat consumption: 105kcal per ton waste oil
3) Power consumption: 40Kwh to recycle 1 ton waste oil
4) Recycled oil quality is good, color is .5~No.2, like SN150
5) Environmentally friendly, without secondary pollution. Certification: ISO9001:2015, SGS, CE,BV
Final clean base oil in the glass sight
When the clean base oil recyced from waste engine oil, then it can be viewed here in the glass sight directly. The glass sight is special design, which can stａnd high vacuum and good seal for the machine.
What Can You Get? (Recovery Rate)
Component | Percentage(%) |
water | 1.5% |
Gasoline/diesel oil | 7% |
Light Lubrication oil | 42% |
Heavy Lubrication oil | 43% |
Residue | 6.5% |
Total | 99% |
Item | Heavy Lube oil | Light Lube Oil |
Appearance | lucidity | lucidity |
Color ≤ | 1.5 | 1 |
Viscosity (40°C)mm2/s | 49.57 | 26.86 |
Viscosity Index ≥ | 96 | 95 |
Anti-oxidation 150°C,min ≥ | 180 | 180 |
Deemulsification,54°C | 5min | 5min |
Flash Point(Open)°C ≥ | 228 | 224 |
Pour Point °C ≤ | -12 | -16 |
neutralization value (mgKOH/g) ≤ | 0.02 | 0.02 |
Our Services
FREE Pre-sale service:
1) We provide presales service in various forms, for example, making investment budget, manufacturing, so that the customers can make reasonable plan with less cost.
2) Investment budgeting: we provided services of product profit analysis, recommendation of machine and relevant budgeting, human resources allocation and budgeting.
3) Plant planning: we provide the dimension of the equipment base, design of the equipment layout, workshop construction suggestion ect.
4)provide the detail information of our our machines need to learn by our customers.
FREE In-sale service:
1) Detailed design of lay-out that is the position of the procession according to the blueprint of customer’s factory.
2) All the technology information for the products.
3) Guide the machine’s installation and train the customers to use the machine for free.
FREE After-sale service:
1) We provide customers free training so that they can use and maintain the machines independently.
2) We will answer customers’ questions on technology in time. If needed, we will offer on-site guidance and assist.
3) We will provide free technical guidance, if customers need new equipment, add or rebuild equipment.
4) All the machines are life-long free technical assistant.
5) All the machines are at most warranty 24months for main parts. The consumable parts are 12months.
FAQ
What are the concerns ?
1)what is the difference between the absolute oil from waste oil and the original oil?
--The absolute oil from waste oil is SN70-SN300 base oil, or SN250 lake of necessary additive.
2) How many liters absolute oil can be distilled from 1 ton waste oil?
--800L-900L( 80%-90%)
3)According to customers' requirements, our oil distillation plant can handle 1ton to 100tons per 24 hours and it can work 24hours without stopping.
4)If the machine got problem within 1-2 years(we guaranteed 1-2 years), If non-human factors, our company will charge.
5)we'll provide free installation, commissioning,training!
6)How much is the chemical cost in 1 ton waste oil’s processing?
--The chemical cost: within 30 USD for one ton waste oil
Why to choose us!
1.High efficient and recovery rate
--black engine oil can be got about 80%-90% yellow base oil, it can be changed into kinds of usable oil with adding some compound additives
--Gasoline and diesel oil can be got about 6%-7%, it can be used as fuel
--Waste oil residue: 6.5%, it can be used as fuel with some diesel
--Water is about 1.5%, it can be put into the water pool as cooling system for the machine,no any pollution.
--The exhaust will be discharged to open air in a safe area from our effluent treatment system,ａnd we promiss it wil reach the environmental protection standard of Singapore.
2.High safety High Quality
One helpful machine can not only be profitable , but also safety needs to be guranteed. The yellow base oil can be got in negative pressure by our DIR series machine with indirect heating.That will protect the machine and oil not to be cracked. Most companies choose direct heating to cut their cost. But it is not safe!Direct heating will burn through the bottom of the distillation kettle, that will make the plant exploded.it's very dangerous for people's lives! Our raw materials are carbon steel and SS304, when the vacuum degree increased, the machine can keep shape! Won't be deformation or cracked!
3.Professional engineers and manufaturer
We are factory specializing in oil purifing, recycling, refining for over 20 years,our engineers are in oil field for 25 years, with rich experience.All of our machines are designed and produced by ourself ! we have our own export right , not third-party!!
所有评论仅代表网友意见，与本站立场无关。