Transformer Oil Filter Machine for Sale-Chongqing Tongrui Filtration Equipment Manufacturing Co., Ltd.

Basic information

The transformer oil filter machine can efficiently remove the moisture, gas and impurities in the insulating oil, improve the compressive strength of the oil and the quality of the oil, and ensure the safe operation of the power equipment. Mainly used in power sector and industrial and mining enterprises to deal with unqualified transformer oil, transformer oil, switch oil, etc.

transformer oil purification machine plant

Transformer oil filter features:

One pot with two-stage vacuum-segregating space, it comes into being different pressure so as to keep oil line balance between two stages.
Imported vacuum-pump from Europe has preceding level in the world and high air pump speed guarantee high working vacuity.
New technology of vacuum-segregating adopts particular spinning disk and stainless steel machine with dehydration and air pump
Using new type of heating equipment which can reduce heating burthen and extend oil life.
Oil level control adopts photoelectric way of which the main components are imported from Switzerland.
Customers can choose equipment equipped with all or partly imported components.
It's equipped with filter assemblies imported from Italy.
All pumps must be airproofed by our factory, moreover running without noise and leakage. extended oil life.

transformer oil filtration plant in south africa

Test machine

1. Close all valves of transformer oil filter machine, connect the oil inlet and outlet pipes, and ensure that the oil passage from the oil tank to the inlet and outlet of the machine is unobstructed.

2. Correctly connect the three-phase four-wire power supply.

3. Start the vacuum pump and the oil drain pump, and pay attention to observe whether the rotation direction of the vacuum pump and the oil drain pump is correct, and whether the vacuum pump-motor, oil pump-motor is blocked.

4. Check whether the temperature controller and the heater are interlocked, that is, the temperature controller controls the heater, which can only be done in an instant.

5. Close the valve connected to the atmosphere, open the pipeline valve, and start the vacuum pump. After the maximum vacuum value indicated by the vacuum gauge is stable, stop the pump for 5 minutes. During this period, observe that the drop of the vacuum gauge pointer should not exceed 0.001Mpa, otherwise the air leakage should be eliminated.

Parameter

Item		Unit	ZJA-30	ZJA-50	ZJA-75	ZJA-100	ZJA-150	ZJA-200	ZJA-300
Flow rate		L/H	1800	3000	4500	6000	9000	12000	18000
Vacuum degree		Mpa	-0.092~ -0.099
Ultimate vacuum		MPa	≤50
Working pressure		MPa	≤0.3
Working temperature		°C	45~65
Power supply			380V/50Hz (or as per requirement)
Noise		dB(A)	≤78
Heating power		kW	30	40	50	60	100	115	192
Total power		kW	34	45	56	66	110	123	207
Inlet&outlet size		mm	25	32	42	42	50	50	60
Weight		Kg	650	850	900	1150	1450	1600	1950
Size	L	mm	1450	1600	1800	1900	2200	2200	2300
	W	mm	1000	1100	1250	1250	1500	1550	1800
	H	mm	1800	1800	1900	2100	2200	2300	2500

Optional Customized Design As Per Client’s Requirements:

(1) PLC intelligent control with touch screen operation and operation status dynamic display.

(2) Online moisture tester, online particle counter and online flow meter with adding-up function.

(3) Frequency converter for free adjustment of flow rate

(4) The whole structure of the machine: s style with four wheels, fixed style, style with trailer(double axles or single axle), fully enclosed style, conceal eaves type and open style of the canvas, etc.